Thanks for the help mate
| ausmini https://www.ausmini.com/forums/ |
|
| Tachometer wiring https://www.ausmini.com/forums/viewtopic.php?f=2&t=50381 |
Page 1 of 1 |
| Author: | Jarred [ Tue Feb 17, 2009 4:27 pm ] |
| Post subject: | Tachometer wiring |
Hey guys, Just bought a tacho and needed some advice on the wiring, i can do it sweet but then it says "green wire to RPM signal wire" well i don't have an rpm signal wire, it says to not put it to any positive terminal in the car so i was wondering should i put it to the negative terminal on the coil? or where in mini's with 3 gauge clusters with a tacho does the rpm signal wire come from? Cheers Jarred |
|
| Author: | Tombo [ Tue Feb 17, 2009 4:39 pm ] |
| Post subject: | |
Thats right, put the wire to the - on the coil. On a 3 guage the signal wire is on the rh end of the cluster, white with a color trace. |
|
| Author: | Jarred [ Tue Feb 17, 2009 8:01 pm ] |
| Post subject: | |
Thanks for the help mate
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|