ausmini
https://www.ausmini.com/forums/

Lightweight flywheels
https://www.ausmini.com/forums/viewtopic.php?f=2&t=50428		 Page 1 of 1
Author:  TheMiniMan [ Wed Feb 18, 2009 8:58 pm ]
Post subject:  Lightweight flywheels
I`ll be doing another run of CNC machined lightweight flywheels shortly,,, just wondering how much interest there would be so i can work out how many i should do in this next batch,,,, I have about 20 flywheels right now but if there is more people wanting them than 20 will allow for...then,,, well,,, let me know if you`re keen & i`ll do a list of all your names & ph numbers so i can tag one for you

They should end up at about $160 exchange (2 piece only please?)

& look just like these-->

Image

Phone or PM me please,,, my e-mail system seems to still be playing up :-( I`m going to have to change server/host or whatever it is :-)

anyways,,, just a heads up if any of you want one as i`m pretty sure there is only about 8 avaliable from this batch & i take ages inbetween making them ,,,so get in now or wait another 6 months (a year) :-)
Author:  Bubbacluby [ Wed Feb 18, 2009 9:49 pm ]
Post subject: 
what do they weigh compare to standard?
Author:  TheMiniMan [ Wed Feb 18, 2009 10:59 pm ]
Post subject: 
technically speaking--> lots less
Author:  mickmini [ Thu Feb 19, 2009 3:16 am ]
Post subject: 
hey Matt,

how about a package deal with a bit of 6mm plate bent and drilled to make a scatter shield with the lightweight flywheels?

might maintain the ability of ausmini members to breed. but maybe you don't want that?
Author:  justfanginaround [ Thu Feb 19, 2009 5:43 am ]
Post subject: 
I'll have one and a scatter sheild would be good to
Author:  sports850 [ Thu Feb 19, 2009 6:29 am ]
Post subject: 
mickmini wrote:
hey Matt,

how about a package deal with a bit of 6mm plate bent and drilled to make a scatter shield with the lightweight flywheels?

might maintain the ability of ausmini members to breed. but maybe you don't want that?


Damn good idea Mick .
Author:  Wombat [ Thu Feb 19, 2009 8:41 am ]
Post subject: 
Anyone have a diagram/pattern of such a scatter plate?
Author:  simon k [ Thu Feb 19, 2009 9:35 am ]
Post subject: 
do you get them balanced after machining Matt ?
Author:  Kennomini [ Thu Feb 19, 2009 7:56 pm ]
Post subject: 
And are they crack tested?
I might be interested in one or two :wink: .
Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/