ausmini
https://www.ausmini.com/forums/

Fuel Line questions
https://www.ausmini.com/forums/viewtopic.php?f=2&t=50448
Page 1 of 1

Author:  Wombat [ Thu Feb 19, 2009 12:14 pm ]
Post subject:  Fuel Line questions

1... Anyone in the Brisbane area want to share a roll of 5/16" bundy tube for fuel line? Only need 2 meters and all I can track down is 6 metre roll for "around $42" Looking for 2 others to share.

2... The fuel line under the car has a 3 sided rectangle half way along about 9" by 12" - Is that for any particular/essential reason?

Author:  drmini in aust [ Thu Feb 19, 2009 12:22 pm ]
Post subject: 

re Q2 I found that on my 850 as well, I just put a straight line in there. :wink:

Author:  Mick [ Thu Feb 19, 2009 12:32 pm ]
Post subject: 

If you guys have an ABS service center up there, they will allow you to purchase by the meter.

Author:  Mini_Special [ Thu Feb 19, 2009 12:34 pm ]
Post subject: 

Email sent Wombat

Author:  Wombat [ Thu Feb 19, 2009 1:36 pm ]
Post subject: 

Mick wrote:
If you guys have an ABS service center up there, they will allow you to purchase by the meter.


They charged me $48 for 1.2 m of brake line :shock: Not going back there

Author:  sports850 [ Thu Feb 19, 2009 1:43 pm ]
Post subject: 

I'll be in for a share if there's still some availible .

(I know I'm not in the Brisbane area but I'm not in a hurry for it so can pay now , get it later :D )

Author:  Mick [ Thu Feb 19, 2009 2:25 pm ]
Post subject: 

Wombat wrote:
Mick wrote:
If you guys have an ABS service center up there, they will allow you to purchase by the meter.


They charged me $48 for 1.2 m of brake line :shock: Not going back there


:shock: that is a bit much...

Author:  Wombat [ Thu Feb 19, 2009 2:50 pm ]
Post subject: 

Mick wrote:
Wombat wrote:
Mick wrote:
If you guys have an ABS service center up there, they will allow you to purchase by the meter.


They charged me $48 for 1.2 m of brake line :shock: Not going back there


:shock: that is a bit much...


Yes it is - I provided most of the tube and fittings - they provided an extra 4 fittings and the 1.2 metres and double flared all the fittings on the precut tube and charged me $83. It wasn't till I got home and check the invoice that I realised what I was charged per item :evil:

Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/