| ausmini https://www.ausmini.com/forums/ |
|
| steering coloum https://www.ausmini.com/forums/viewtopic.php?f=2&t=5048 |
Page 1 of 1 |
| Author: | danidad [ Thu Feb 24, 2005 11:55 am ] |
| Post subject: | steering coloum |
steering coloum lenght was asked about a spare coloum recently...is the only practical difference between roundie and clubby the length, and how does 1100 measure up in comparison?? any clues I noted that the 1100 has a carpet protector flange (for want of a better description) which seems a good idea |
|
| Author: | Matt68 [ Thu Feb 24, 2005 12:29 pm ] |
| Post subject: | |
The Mk1 columns had a centre horn push, so had something different in the top of the column.... Haven't yet stripped mine out so I can't be much more help. Oh, if anyone knows HOW to pull a column and rack out of a (hydro 68) mini the easy way (as in not the workshop manual 'remove engine and subframe way') i'd love to hear it! ... hands thread back.... 
Matt |
|
| Author: | gafmo [ Thu Feb 24, 2005 5:13 pm ] |
| Post subject: | |
Clubby's are longer but about an Inch. Email or Pm regaring to replacing a steering rack
|
|
| Author: | Matt68 [ Thu Feb 24, 2005 6:55 pm ] |
| Post subject: | |
Gafmo, Email sent 
|
|
| Author: | ryan [ Thu Feb 24, 2005 8:05 pm ] |
| Post subject: | |
i think the easiest way to remove the rack is to undo the back two subframe mounts and allow the engine to rock down so that u can remove it, its not as bad as it sounds. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|