scotta_74 wrote:
Any pics Joe??
| ausmini https://www.ausmini.com/forums/ |
|
| vibration https://www.ausmini.com/forums/viewtopic.php?f=2&t=50801 |
Page 1 of 5 |
| Author: | tinymorris1969 [ Mon Mar 02, 2009 4:27 pm ] |
| Post subject: | vibration |
ok ive owned the new van for a day now and already i have found that it has a pretty bad vibration when u accelerate... when u let it roll freely and in gear it doesnt vibrate but soon as u hit the accelerator it shakes and vibrates any ideas? |
|
| Author: | Blokeinamoke [ Mon Mar 02, 2009 4:28 pm ] |
| Post subject: | |
wheel nuts ? |
|
| Author: | Tombo [ Mon Mar 02, 2009 4:30 pm ] |
| Post subject: | |
missfire? |
|
| Author: | DTrain [ Mon Mar 02, 2009 4:31 pm ] |
| Post subject: | |
engine steady rubber? |
|
| Author: | tinymorris1969 [ Mon Mar 02, 2009 4:33 pm ] |
| Post subject: | |
hmmm ok then.. it might be the engine steady rubber cause the engine does wobble alot. |
|
| Author: | sports850 [ Mon Mar 02, 2009 4:37 pm ] |
| Post subject: | |
What year is the van Joe and what type of engine/gearbox/driveshafts ? |
|
| Author: | scotta_74 [ Mon Mar 02, 2009 4:51 pm ] |
| Post subject: | |
Any pics Joe?? |
|
| Author: | gerg [ Mon Mar 02, 2009 5:36 pm ] |
| Post subject: | |
scotta_74 wrote: Any pics Joe??
|
|
| Author: | TUCK3r [ Mon Mar 02, 2009 6:35 pm ] |
| Post subject: | |
you take the handbrake off? |
|
| Author: | tinymorris1969 [ Mon Mar 02, 2009 7:47 pm ] |
| Post subject: | |
handbrakes off, its a 72 clubby windowless van with a stock 1100 motor and rubber uni joints. |
|
| Author: | sgc [ Mon Mar 02, 2009 7:50 pm ] |
| Post subject: | |
tinymorris1969 wrote: rubber uni joints.
If you've got stuffed engine mounts, don't expect these to last very long either.. recipe for lots of vibration and eventually a BANG. |
|
| Author: | d1ck0 [ Mon Mar 02, 2009 8:36 pm ] |
| Post subject: | |
The twin carbies need adjusting 
Dicko |
|
| Author: | Ziegech [ Mon Mar 02, 2009 8:44 pm ] |
| Post subject: | |
suspension arm bushs could have had it and put ur alignment out under acceleration? Just a different perspective |
|
| Author: | DTrain [ Mon Mar 02, 2009 8:46 pm ] |
| Post subject: | |
engine mounts worn? 
|
|
| Author: | minimy [ Mon Mar 02, 2009 9:41 pm ] |
| Post subject: | |
rubber uni joints are rooted,bet my left nut.. |
|
| Page 1 of 5 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|