ausmini
https://www.ausmini.com/forums/

stripe width?
https://www.ausmini.com/forums/viewtopic.php?f=2&t=50944
Page 1 of 1

Author:  woodwormm [ Sat Mar 07, 2009 9:36 am ]
Post subject:  stripe width?

is there a standard width for bonnet stripes?

i'm going to put a single stripe on mine (to cover 'large' paint chip), i'm thinkig 100mm wide. Any thoughts?

Author:  Davo111 [ Sat Mar 07, 2009 10:05 am ]
Post subject: 

Stripes should always come in pairs to make things look symetrical, 1 stripe looks out of balance IMHO... 8) 8) 8)

Author:  Mick [ Sat Mar 07, 2009 10:07 am ]
Post subject: 

Monaros make single offset stripes look soo sexy.

Author:  WantOne [ Sat Mar 07, 2009 12:02 pm ]
Post subject: 

Mick wrote:
Monaros make single offset stripes look soo sexy.


Most times they're in a pair too. One fat one next to one skinny one.

Author:  Gadgets mini [ Sat Mar 07, 2009 12:44 pm ]
Post subject: 

WantOne wrote:
Mick wrote:
Monaros make single offset stripes look soo sexy.


Most times they're in a pair too. One fat one next to one skinny one.


yep

Jake and Elwood

Jay and Silent Bob

Bert and Ernie

Stan and Laurel

K Fed and Britney



:wink: :wink:

Author:  BALLISTIC [ Sat Mar 07, 2009 12:46 pm ]
Post subject: 

Do what you like its your car after all..........as long as your happy with the end result :!: It really doesn't matter what others think INMO.
I had a centre stripe that went all the way over the car, was about 150 -200mm wide, contemplating doing it again but will wait and see.

Author:  Gadgets mini [ Sat Mar 07, 2009 12:49 pm ]
Post subject: 

BALLISTIC wrote:
Do what you like its your car after all..........as long as your happy with the end result :!: It really doesn't matter what others think INMO.
I had a centre stripe that went all the way over the car, was about 150 -200mm wide, contemplating doing it again but will wait and see.


You just waiting till their doing line marking again in your area hey Scott, and just drive under the spray gun :wink:

Author:  BALLISTIC [ Sat Mar 07, 2009 12:53 pm ]
Post subject: 

Gadgets mini wrote:
BALLISTIC wrote:
Do what you like its your car after all..........as long as your happy with the end result :!: It really doesn't matter what others think INMO.
I had a centre stripe that went all the way over the car, was about 150 -200mm wide, contemplating doing it again but will wait and see.


You just waiting till their doing line marking again in your area hey Scott, and just drive under the spray gun :wink:


Not at all......have to go to the airport to get the width stripe I'm after!

Gadgets mini wrote:
You just waiting till their doing line marking again in your area hey Scott :wink:


:shock: The councils line markers only do pi$$y little lines about 50mm wide and only know how to do the crooked and in white :!:

Author:  Kennomini [ Sun Mar 08, 2009 2:24 pm ]
Post subject: 

100 mm is about right on a mini bonnet.

Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/