| ausmini https://www.ausmini.com/forums/ |
|
| door striker plate prob https://www.ausmini.com/forums/viewtopic.php?f=2&t=51222 |
Page 1 of 1 |
| Author: | scudley [ Sat Mar 14, 2009 9:47 pm ] |
| Post subject: | door striker plate prob |
after spending sat night taking out 46 yo subframes im stuck on getting the door striker plates out my 850 any easy way that anyone knows of please |
|
| Author: | Kennomini [ Sun Mar 15, 2009 1:02 am ] |
| Post subject: | |
Do you mean the plate on the body or the catch inside the door? The one on the body should just be screwed on. The one in the door (depending on what doors it has) will be a PITA. A photo of what your having trouble with might help. |
|
| Author: | mickmini [ Sun Mar 15, 2009 5:04 am ] |
| Post subject: | |
lots of penetrating oil over a few days then hit it with an impact driver. I have found that this helps with a lot of the stuck philips head screws. cheers michael |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|