| ausmini https://www.ausmini.com/forums/ |
|
| Super borer!!!?!?? https://www.ausmini.com/forums/viewtopic.php?f=2&t=51644 |
Page 1 of 2 |
| Author: | Blunder [ Sun Mar 29, 2009 7:33 pm ] |
| Post subject: | Super borer!!!?!?? |
This can't be right!??! http://cgi.ebay.com.au/leyland-mini-eng-gearbox-998cc-bored-to-1320cc_W0QQitemZ250397955925QQcmdZViewItemQQptZAU_Car_Parts_Accessories?hash=item250397955925&_trksid=p3286.c0.m14&_trkparms=66%3A2%7C65%3A10%7C39%3A1%7C240%3A1318 
|
|
| Author: | drmini in aust [ Sun Mar 29, 2009 7:39 pm ] |
| Post subject: | |
It's definitely a 1275 head, can't tell what the block is. Might be one of those rare 1275s with a 998 engine number... 
|
|
| Author: | Mick [ Sun Mar 29, 2009 7:40 pm ] |
| Post subject: | |
Maybe he means 1220? Like in the classic Vizard method with Hillman Imp pistons?? |
|
| Author: | drmini in aust [ Sun Mar 29, 2009 7:49 pm ] |
| Post subject: | |
I just zoomed the pic in BIG, it's definitely a 1275 block. You can see the 3/8" step to the lug below the engine number pad. |
|
| Author: | d1ck0 [ Sun Mar 29, 2009 7:57 pm ] |
| Post subject: | |
I've asked for more information, and whether I can go and inspect. Worth a drive to Newie to have a look and I'm on leave at the moment. Dicko. |
|
| Author: | simon k [ Sun Mar 29, 2009 8:25 pm ] |
| Post subject: | |
keep your mouth shut and you might get a bargain.... |
|
| Author: | d1ck0 [ Sun Mar 29, 2009 9:32 pm ] |
| Post subject: | |
simon k wrote: keep your mouth shut and you might get a bargain.... Was thinking that  His friend (the owner) is calling me tomorrow.
Dicko |
|
| Author: | d1ck0 [ Sun Mar 29, 2009 9:33 pm ] |
| Post subject: | |
drmini in aust wrote: I just zoomed the pic in BIG, it's definitely a 1275 block. You can see the 3/8" step to the lug below the engine number pad. What would a 1275 +.060" end up as?
Dicko |
|
| Author: | scotta_74 [ Sun Mar 29, 2009 9:47 pm ] |
| Post subject: | |
Is that a rat I smell or just something fishy????? 
|
|
| Author: | sgc [ Sun Mar 29, 2009 9:52 pm ] |
| Post subject: | |
d1ck0 wrote: What would a 1275 +.060" end up as?
1328.7cc by my spreadsheet based on standard 2.780" bore x 3.200" stroke (1273.2cc). |
|
| Author: | d1ck0 [ Sun Mar 29, 2009 9:53 pm ] |
| Post subject: | |
scotta_74 wrote: Is that a rat I smell or just something fishy????? Since asking the question he has updated the post to include:
"will supply engine number tomorrow as iv been questioned of actual engine size engine has been bored 60,000... will confirm more details tomorrow..." Dicko |
|
| Author: | scotta_74 [ Sun Mar 29, 2009 9:56 pm ] |
| Post subject: | |
I hope it all checks out Dicko. I just err on the side of caution with ad's like this one on ebay
|
|
| Author: | drmini in aust [ Mon Mar 30, 2009 7:14 am ] |
| Post subject: | |
d1ck0 wrote: drmini in aust wrote: I just zoomed the pic in BIG, it's definitely a 1275 block. You can see the 3/8" step to the lug below the engine number pad. What would a 1275 +.060" end up as? Dicko 1330 |
|
| Author: | albino235 [ Mon Mar 30, 2009 9:14 am ] |
| Post subject: | |
d1ck0 wrote: engine has been bored 60,000...
Wow thats a big over size 
|
|
| Author: | d1ck0 [ Mon Mar 30, 2009 10:34 am ] |
| Post subject: | |
albino235 wrote: d1ck0 wrote: engine has been bored 60,000... Wow thats a big over size
dicko |
|
| Page 1 of 2 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|