| ausmini https://www.ausmini.com/forums/ |
|
| sandblasting https://www.ausmini.com/forums/viewtopic.php?f=2&t=51775 |
Page 1 of 1 |
| Author: | red_850 [ Thu Apr 02, 2009 3:51 pm ] |
| Post subject: | sandblasting |
Hi all, can anyone advise me where to get my subframes sandblasted in Sydney? Thanks, Dave |
|
| Author: | doogie [ Thu Apr 02, 2009 5:26 pm ] |
| Post subject: | |
Mr Clean at Padstow used to be reasonably priced, but im not sure now, give them a bell and ask a price. Doogie |
|
| Author: | Aussie Brian [ Thu Apr 02, 2009 6:55 pm ] |
| Post subject: | |
Dont know what area your in but there is also a guy at Taren Point if that is any help. His son does it for a bit of extra money in a shipping container that is part of a panel repair shop. He did a couple of signframes for me. Don't have the details with me but i shall look them up at work tomorrow. |
|
| Author: | red_850 [ Thu Apr 02, 2009 7:57 pm ] |
| Post subject: | |
thanks fellas! |
|
| Author: | cd [ Thu Apr 02, 2009 8:16 pm ] |
| Post subject: | |
Dave I used Austec in Chipping Norton. They are very careful with what they blast & which blast product to use. There is sand, grit & plastic media blast. Highly recommend them. Can give address/ phone No if needed Good luck Craig |
|
| Author: | Trimm [ Fri Apr 03, 2009 6:38 am ] |
| Post subject: | |
Just had mine done Quik Strip Bankstown $30-50 |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|