| ausmini https://www.ausmini.com/forums/ |
|
| Hinges and doors https://www.ausmini.com/forums/viewtopic.php?f=2&t=52246 |
Page 1 of 1 |
| Author: | Wombat [ Fri Apr 17, 2009 8:40 pm ] |
| Post subject: | Hinges and doors |
Got the door off with the bodgy hinge - are the holes in the door skin normally about 1/2" diameter cf the bolts in the hinge at 5/16" ? I can see how this could allow for adjustment but a couple are elongated and can't tell if they are worn bigger as well as elongated 
|
|
| Author: | drmini in aust [ Fri Apr 17, 2009 8:45 pm ] |
| Post subject: | |
Yes the door holes are elongated for adjustment. Remember to put the 2 tapered alloy washers on the top hinge, on door only. Big flat washers go on stud first, inside the door. |
|
| Author: | Wombat [ Fri Apr 17, 2009 8:49 pm ] |
| Post subject: | |
drmini in aust wrote: Yes the door holes are elongated for adjustment.
Remember to put the 2 tapered alloy washers on the top hinge, on door only. Big flat washers go on stud first, inside the door. Noted (and kept aside ) one tapered washer didn't see a second - but then a few things fell down into the door pockets and I left them there 
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|