ausmini
https://www.ausmini.com/forums/

MOWOG the BMC gorilla also assembled door channels
https://www.ausmini.com/forums/viewtopic.php?f=2&t=52253
Page 1 of 1

Author:  Wombat [ Sat Apr 18, 2009 9:28 am ]
Post subject:  MOWOG the BMC gorilla also assembled door channels

Trying to get the sliding windows out of the drivers door last night. Already have the passenger door apart and figured the 3 little screws would be in the same positions - WRONG - no where near and when I did locate them they are rusted solid and slots in the screw heads stripped.

Guess I'll be drilling them out but at least I know there is nothing sacred about where they can be screwed back :roll:

Author:  NG [ Sat Apr 18, 2009 10:42 am ]
Post subject: 

yeh mate..

it sucks..

i had to hammer them muck around to get the rusted crap out.

id Reccomend you re chroming your sliders while they are out.

a mob in geebung did them for $70 for the pare they come out really good.

but yeh it's a muck around them doors.

i still cant get them working right the top felt just does not seem to sit right.

Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/