| ausmini https://www.ausmini.com/forums/ |
|
| Dashpot lid https://www.ausmini.com/forums/viewtopic.php?f=2&t=52440 |
Page 1 of 1 |
| Author: | Hymie [ Thu Apr 23, 2009 5:27 pm ] |
| Post subject: | Dashpot lid |
I noticed a bit of chattering on the way home tonight, so I lifted the bonnet and found this: 
Yep, that's the needle. From looking in my black book I think it's sticking through is called a damper..?? Has anyone had this happen before?  I'll have to organise a replacement. Are there any other bits I should be looking to upgrade while I do this? I'm not sure what size my carby is, but it's a single sitting on a 998.
|
|
| Author: | drmini in aust [ Thu Apr 23, 2009 5:28 pm ] |
| Post subject: | |
that's not the needle, but the damper rod. Pull it out and screw another damper in. |
|
| Author: | Hymie [ Thu Apr 23, 2009 6:15 pm ] |
| Post subject: | |
Cool, thanks! Is it this? It's a 77 Clubbie, so would it have a HS4 carby? LOL.. such a noob 
|
|
| Author: | blue_deluxe [ Thu Apr 23, 2009 6:17 pm ] |
| Post subject: | |
How would thatve happened? |
|
| Author: | simon k [ Thu Apr 23, 2009 7:52 pm ] |
| Post subject: | |
blue_deluxe wrote: How would thatve happened?
no bloody idea, but wow!! I'd love to know how that happened- it's not exactly thin plastic, and there isn't meant to be any way for it to be pushed up that hard Hymie, anyone with a stock of mini bits will have heaps of old carbs laying around - I've got plenty of them, but you'll find someone close to you with one. Your car won't run properly without it in there, and top up the oil in there as well |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|