Sit the pump on there, cut the hose about 1mm longer than the total visible room for it.
Use 1/2" heater hose, or 15/32 vacuum hose (stronger).
| ausmini https://www.ausmini.com/forums/ |
|
| bypass hose..... https://www.ausmini.com/forums/viewtopic.php?f=2&t=52475 |
Page 1 of 1 |
| Author: | Blunder [ Fri Apr 24, 2009 3:17 pm ] |
| Post subject: | bypass hose..... |
Currently got the water pump off my car so while evrything is apart going to replace the bypass hose(currently has the confoluted type) with a solid piece of hose... What length should it be? thanks |
|
| Author: | drmini in aust [ Fri Apr 24, 2009 3:20 pm ] |
| Post subject: | |
Sit the pump on there, cut the hose about 1mm longer than the total visible room for it. Use 1/2" heater hose, or 15/32 vacuum hose (stronger).
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|