when i looked up my chassis number for my clubman this is what it is Leyland mini EPAI 998 what is that model??
whats is EPAI
| ausmini https://www.ausmini.com/forums/ |
|
| what is this clubman https://www.ausmini.com/forums/viewtopic.php?f=2&t=5253 |
Page 1 of 2 |
| Author: | benjamin [ Thu Mar 03, 2005 12:40 pm ] |
| Post subject: | what is this clubman |
when i looked up my chassis number for my clubman this is what it is Leyland mini EPAI 998 what is that model?? whats is EPAI
|
|
| Author: | J_A_M [ Thu Mar 03, 2005 12:44 pm ] |
| Post subject: | |
EPA is the Environment Protection Authority. Dunno what the I stands for....
You must have a post '76 clubby? That's when stricter EPA laws came into effect in OZ. |
|
| Author: | benjamin [ Thu Mar 03, 2005 12:45 pm ] |
| Post subject: | |
its says 10/76 on the plate |
|
| Author: | Harley [ Thu Mar 03, 2005 1:05 pm ] |
| Post subject: | |
I'm not too sure but going by that info, the car might have been made in October of 1976. Just a guess though. The EPA might be related to the emissions the car gives out if anything happened at the time. |
|
| Author: | J_A_M [ Thu Mar 03, 2005 1:09 pm ] |
| Post subject: | |
yea in late 76 the EPA regs came in. My clubby is a late 76 and has all that gear. |
|
| Author: | CLUBMAN [ Thu Mar 03, 2005 1:24 pm ] |
| Post subject: | |
lucky for me (2/72) i missed out on all that crap,coz if its suppot to have it,and you ger defected,its all over 
we had a 1977 leyland get a 1.3i motor put in,and regencypark wanted it tested the same as what a brand new 1977 motor with all the polution crap.unfair
|
|
| Author: | benjamin [ Thu Mar 03, 2005 1:36 pm ] |
| Post subject: | |
my motor dun have none of it on i dont think
|
|
| Author: | min13k [ Thu Mar 03, 2005 1:39 pm ] |
| Post subject: | |
surely dont makka |
|
| Author: | gafmo [ Thu Mar 03, 2005 4:13 pm ] |
| Post subject: | |
You Luck boy 
|
|
| Author: | benjamin [ Thu Mar 03, 2005 4:37 pm ] |
| Post subject: | |
why am i lucky boy?
|
|
| Author: | dr trim [ Thu Mar 03, 2005 4:42 pm ] |
| Post subject: | |
slows ur car down
|
|
| Author: | benjamin [ Thu Mar 03, 2005 4:44 pm ] |
| Post subject: | |
ok well im glad it didnt come with that then 
|
|
| Author: | 13secmini [ Thu Mar 03, 2005 4:52 pm ] |
| Post subject: | |
in that pic,, isnt that thing in the middle of the su's part of the pollution gear?? |
|
| Author: | CLUBMAN [ Thu Mar 03, 2005 4:58 pm ] |
| Post subject: | |
PVC? polution control valve goes from breather to carbies and gets ya nice clean fresh air all dirty and hot 
piss it off,i pissed mine off,the breather are going to cath can |
|
| Author: | benjamin [ Thu Mar 03, 2005 5:11 pm ] |
| Post subject: | |
what do i put in instead ? just a k and n style breather or would it need a catch can? |
|
| Page 1 of 2 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|