You are the King of poor advice Drexxie. I would keep your illegall and shonky advice to yourself before you get others in trouble
| ausmini https://www.ausmini.com/forums/ |
|
| moke https://www.ausmini.com/forums/viewtopic.php?f=2&t=52723 |
Page 1 of 2 |
| Author: | kudos to minis [ Thu Apr 30, 2009 11:32 am ] |
| Post subject: | moke |
theres a moke i want to buy but it has no compliance plate is this a bad thing? |
|
| Author: | doogie [ Thu Apr 30, 2009 2:22 pm ] |
| Post subject: | |
Yes. Doogie |
|
| Author: | simon k [ Thu Apr 30, 2009 2:27 pm ] |
| Post subject: | |
if it was made after 1970 |
|
| Author: | Drexxle [ Thu Apr 30, 2009 2:36 pm ] |
| Post subject: | |
<mod edit > |
|
| Author: | scotta_74 [ Thu Apr 30, 2009 2:50 pm ] |
| Post subject: | |
You are the King of poor advice Drexxie. I would keep your illegall and shonky advice to yourself before you get others in trouble
|
|
| Author: | mollymoke [ Thu Apr 30, 2009 2:57 pm ] |
| Post subject: | Moke |
The question is why doesn't if have a plate? If the owner has used it to get rego on a 'Choke', then there will be 2 cars registered with the same body number..... How you might get around that? I am unsure, but be carful or you may be stuck with a car that you can't legally register, always ways to get around that I guess 
|
|
| Author: | kudos to minis [ Thu Apr 30, 2009 2:59 pm ] |
| Post subject: | |
its this http://cgi.ebay.com.au/ws/eBayISAPI.dll ... 0363438328 it does say it has a plate saying bmc moke though |
|
| Author: | Drexxle [ Thu Apr 30, 2009 3:00 pm ] |
| Post subject: | |
ha. just because i got away with it, doesnt mean you should try it. |
|
| Author: | simon k [ Thu Apr 30, 2009 3:01 pm ] |
| Post subject: | |
get the ID's off the seller, Morris 1100 and others will be able to tell you what year it is and what sort of plate it should have |
|
| Author: | Drexxle [ Thu Apr 30, 2009 3:02 pm ] |
| Post subject: | |
Is it an original Moke, or is it a Kit Moke. Mini and Moke World in Sydney used to build Moke Shells, they patented a design, so i dont know how many of them are on the roads compared to original ones. |
|
| Author: | scotta_74 [ Thu Apr 30, 2009 3:10 pm ] |
| Post subject: | Re: moke |
kudos to minis wrote: theres a moke i want to buy but it has no compliance plate is this a bad thing?
As others have said, yes and no. There maybe valid reasons why there is no plate. I would suggest getting as much info on the body (numbers and locations) and either going to the RTA or your local police station with them. If it was me I would rather find out beofre I spent a fortune if there were issues with the body. Shoot me a PM if you need any other info. Scott |
|
| Author: | kudos to minis [ Thu Apr 30, 2009 3:10 pm ] |
| Post subject: | |
vin is YJBAB8R engine number is 10YF/U/H2254 if thats help to anyone |
|
| Author: | kudos to minis [ Thu Apr 30, 2009 3:14 pm ] |
| Post subject: | |
and it was recently resprayed so that maybe the reason for the missing compliance plate?? |
|
| Author: | Wombat [ Thu Apr 30, 2009 3:37 pm ] |
| Post subject: | |
Looks like a plate behind the fuse holder where it should be. My sons old Moke had the fuse holder over the plate and I had to remove it to read the numbers |
|
| Author: | drmini in aust [ Thu Apr 30, 2009 4:39 pm ] |
| Post subject: | |
kudos to minis wrote: vin is YJBAB8R
engine number is 10YF/U/H2254 if thats help to anyone That VIN (actually is compliance number, not VIN) is just the prefix, there must be other numbers following to identify the body. If they are not there, I would leave it... |
|
| Page 1 of 2 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|