it's so close i can smell it.

i was thinking of taking it to a shop to get a custom one for the van.

or should i get one of them rc40's?

are they anygood.

will be for a van. or i guess one with the best note!!

nothing bigger than 1 7/8 inch pipe and a hotdog+ sauce

tomato sauce?

so there is nothing really super duper i should be looking at.

I just went to a local exhaust place. Asked for one that had a nice note and flowed well. What they put on is absolutely perfect! Just go and have a chat to them, otherwise you can come and have a listen to my car next time you are up here and see if they'll sell you just the exhaust and you could get it fitted in brissy?

_________________
"In two years time your car will be like a lady's clothes, out of date, my car will still be in fashion when I am dead" - Sir Alec speaking to Pininfarina

yeh i could do that.

but want the car to drive now now now lol..

I'll just say pimp it! to an exhaust shop & hope for the best.

I could drive the mini with no exhaust down to toowomba haha. BROOOOOM

Intresting.

how much as it?

I wanted a 2" system on the 1360 (the 1.75 was too small with the RE282 cam for max power).
I crawled under the car with a tape, measured the pipe lengths, added 50mm to each and guessed the bend angles.
Went to Parramatta Exhausts and got the 2 pipes, 2" muffler, and a few clamps- total cost $145.
Took me about 30 mins to cut and fit, in the driveway at home.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R.

the 1 7/8 pipe and single straight through muffler for my LS cost $140 and took less than 1 hour to make and fit by a local exhaust place

_________________
120bhp with 450kg just fun waiting to happen

We were prob. drunk when we set it up last and thought this will be a good idea

You can get any muffler you want so long as you can see through it. Straught through is what you want. Just a hot dog will be too loud IMO. I have a hot dog infront of a muffler on my 2"

_________________
Lillee - 1969 Morris Mini K

If you buy a Lukey, or another brand with bursted peforations in the inner tube (not plain holes) fit it the right way round or you will lose BIG HP.
I found this out on Barney, the PO had fitted it arse about.
The perforation holes must be visible from the back, not the front...

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R.

So should i go with an Rc40 or a lukey muff.

is anything better over the other.

what will an exhaust shop sell me?

ported & polished engine.

straight through?
not sure on size 1-3/4 ? 1-7/8

i was looking at this, to suit a 1275, is it any good? pricing/performance wise?

http://www.minisport.com.au/prod364.htm

guess i just like the stainless look

yeh mines a Van so i cant fit that,

i think i need a side exit.

Gotta love the sound of an exhaust with a hotdog

Especially when on the loud pedal

_________________
http://www.youtube.com/watch?v=nDMkVq1jRGU