ausmini
https://www.ausmini.com/forums/

Hydro pump in canberra
https://www.ausmini.com/forums/viewtopic.php?f=2&t=53014		 Page 1 of 1
Author:  roleyfoley [ Fri May 08, 2009 8:17 pm ]
Post subject:  Hydro pump in canberra
Hey guys
was just wondering if anyone had or knew of where i could borrow a hydro suspension pump from in canberra or around canberra, the guys at pedders said there one for here and sydney is busted so thats a big help :(
Author:  sitnlo62 [ Fri May 08, 2009 8:25 pm ]
Post subject:  Re: Hydro pump in canberra
roleyfoley wrote:
Hey guys
was just wondering if anyone had or knew of where i could borrow a hydro suspension pump from in canberra or around canberra, the guys at pedders said there one for here and sydney is busted so thats a big help :(


See if you can buy it from them and fix it.
Dave
Author:  roleyfoley [ Fri May 08, 2009 8:30 pm ]
Post subject:  Re: Hydro pump in canberra
sitnlo62 wrote:
roleyfoley wrote:
Hey guys
was just wondering if anyone had or knew of where i could borrow a hydro suspension pump from in canberra or around canberra, the guys at pedders said there one for here and sydney is busted so thats a big help :(


See if you can buy it from them and fix it.
Dave


I could but i think i would end up breaking it more
Author:  simon k [ Fri May 08, 2009 8:35 pm ]
Post subject: 
they're very easy to make... have a search using

grease AND gun AND hydro AND pump

as the search text ;)
Author:  MINImal effort [ Fri May 08, 2009 8:36 pm ]
Post subject: 
The ACT Mini Club has one.......
... free for members use :wink:

ACT Mini Car Club
PO Box 4268 KINGSTON ACT 2604
Meet 7:30pm 3rd Wednesday of the Month
Deakin Sports & Social Club, Deakin

http://www.actminicarclub.org (Website a touch out of date currently :( )
Author:  TUCK3r [ Fri May 08, 2009 8:36 pm ]
Post subject: 
have you tried the mini car club of canberra they may have one,or know where you maybe able to get one to borrow.


Cheers TUCK3R
Author:  Morris 1100 [ Sat May 09, 2009 7:39 pm ]
Post subject: 
Make one out of a Master cylinder. :wink:
Author:  sgc [ Sat May 09, 2009 7:43 pm ]
Post subject: 
Morris 1100 wrote:
Make one out of a Master cylinder. :wink:


.. or a grease gun.
Author:  Morris 1100 [ Sat May 09, 2009 7:55 pm ]
Post subject: 
If the grease gun idea was any good I would have made one. :wink:
They are just too slow, The master cylinder can pump much quicker than a grease gun. They are Ok for a quick top-up but too slow for a full fill. :wink:
Author:  sgc [ Sat May 09, 2009 8:14 pm ]
Post subject: 
Morris 1100 wrote:
They are Ok for a quick top-up but too slow for a full fill. :wink:


Nonsense, I've done 2 cars with mine now from empty and it takes about 4 fills of the gun to get the car off the bump stops.. no time at all. A master cylinder will be faster though.. maybe I'm just not as impatient as some :lol:
Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/