ausmini
https://www.ausmini.com/forums/

after market seatbelts.
https://www.ausmini.com/forums/viewtopic.php?f=2&t=53028		 Page 1 of 1
Author:  NG [ Sat May 09, 2009 4:07 am ]
Post subject:  after market seatbelts.
any one got any photo's of what they have & how it looks installed?

how it is bolted up.

wanna see who you guys did it & what neat looking set ups are going around?

ive got some after market ones & i reckon them kipin retractable ones stick out lick dogs balls.

:?

thanks.
Author:  drmini in aust [ Sat May 09, 2009 9:06 am ]
Post subject: 
I run 2 Klippan retractibles in the front of my `70 Matic.
To let them clear the door pockets I redrilled their bolt hole up closer to the reel, then cut the excess off the bracket.

Image
Image
Author:  NG [ Sat May 09, 2009 9:33 am ]
Post subject: 
great doc great!!

yeh where it bolts to the originally with this seat belts just is to close to me?

it looks messy & it's fouling a tad on the seats.

but with your set up moving it would be a treat!

did you make a new hole far from the original bolt?
Author:  drmini in aust [ Sat May 09, 2009 9:55 am ]
Post subject: 
The body mount is the original spot, the captive nut is welded in at the factory.
I just moved the hole in the Klippan reel bracket up, this dropped the reel down a bit. :wink:
Author:  NG [ Sat May 09, 2009 9:57 am ]
Post subject: 
ah so you re drilled in the bracket where it bolts to the floor?

then just cut the extra fat so to speak.

8) it looks likes it's meant to be in your mini.
Author:  drmini in aust [ Sat May 09, 2009 10:00 am ]
Post subject: 
I like these belts, they do work well. After useing the #&%^**% static belts in the wife's S replica.... :x
Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/