| ausmini https://www.ausmini.com/forums/ |
|
| Part No's for Valves https://www.ausmini.com/forums/viewtopic.php?f=2&t=53030 |
Page 1 of 1 |
| Author: | d1ck0 [ Sat May 09, 2009 8:25 am ] |
| Post subject: | Part No's for Valves |
Can anyone tell me the part No's for Valves and Guides for a 12G295 head? Dicko |
|
| Author: | drmini in aust [ Sat May 09, 2009 8:55 am ] |
| Post subject: | |
Inlet valve 12G296, 1.219" dia, wide collet. Exhaust valve AEA434, 1.000" dia, wide collet. If seats worn you can get AEA464# from Karcraft, 1.062" dia, wide collet. Guides.... not seen smallbore ones listed for years, I would use 12G1963 (1275 ones) and shorten the bottom end by 3mm. 
|
|
| Author: | d1ck0 [ Sat May 09, 2009 8:58 am ] |
| Post subject: | |
Thanks Doc. Dicko |
|
| Author: | 4myego [ Sat May 09, 2009 9:49 am ] |
| Post subject: | |
drmini in aust wrote: Inlet valve 12G296, 1.219" dia, wide collet.
Exhaust valve AEA434, 1.000" dia, wide collet. If seats worn you can get AEA464# from Karcraft, 1.062" dia, wide collet. Guides.... not seen smallbore ones listed for years, I would use 12G1963 (1275 ones) and shorten the bottom end by 3mm. Most people would have looked these part numbers up in a book. Doc knows them!! Waiting for someone to ask an engine question that stumps him. Come on, lets try. |
|
| Author: | Morris 1100 [ Sat May 09, 2009 6:59 pm ] |
| Post subject: | |
4myego wrote: Waiting for someone to ask an engine question that stumps him. Come on, lets try.
Whats the highest mountain in the Andes? |
|
| Author: | 4myego [ Sat May 09, 2009 10:03 pm ] |
| Post subject: | |
Mt. Aconcagua, 6959 m. Signed DOC |
|
| Author: | sgc [ Sat May 09, 2009 10:30 pm ] |
| Post subject: | |
Morris 1100 wrote: 4myego wrote: Waiting for someone to ask an engine question that stumps him. Come on, lets try. Whats the highest mountain in the Andes? Errr.... |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|