Try this.
Cheers Pete
| ausmini https://www.ausmini.com/forums/ |
|
| another needle question... https://www.ausmini.com/forums/viewtopic.php?f=2&t=53039 |
Page 1 of 1 |
| Author: | mattsmadmini [ Sat May 09, 2009 4:44 pm ] |
| Post subject: | another needle question... |
998... worked head... 1 3/4 SU... and some extractors? ideas what needle i should be looking at? Cheers, Matty |
|
| Author: | EST-071 [ Sat May 09, 2009 9:50 pm ] |
| Post subject: | |
Try this. Cheers Pete
|
|
| Author: | mattsmadmini [ Sun May 10, 2009 5:06 pm ] |
| Post subject: | |
where do i find that program? 
its awsome! |
|
| Author: | EST-071 [ Sun May 10, 2009 5:13 pm ] |
| Post subject: | |
http://www.winsu.co.uk/ As with all these sort of things, it will not be perfect but gives a good starting piont. Cheers Pete |
|
| Author: | sgc [ Sun May 10, 2009 5:50 pm ] |
| Post subject: | |
WinSU is quite biased towards UK-spec cars, so it's needle recommendations aren't going to be perfect for any modded Oz mini.. but it'll be close, and lots better than nothing 
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|