Later MK1/1.5 cars used the commonised 22A1288 3 synchro remote change casing.
RonR
| ausmini https://www.ausmini.com/forums/ |
|
| Cooper S numbers? https://www.ausmini.com/forums/viewtopic.php?f=2&t=5305 |
Page 1 of 1 |
| Author: | FIGJAM [ Sat Mar 05, 2005 4:52 pm ] |
| Post subject: | Cooper S numbers? |
Greeting's all, I have just purchased what I believe is a genuine Cooper S Mk1 Engine,head and gearbox.The numbers are as follow's: Engine AFSAY41169 Head AEG183 Gearbox #22G1128 Could some one with more knowledge than me (ask your kids) verify that these are genuine so I can sleep at night. Any help,good or bad would be greatly appreciated. Cheers Brendan |
|
| Author: | drmini in aust [ Sat Mar 05, 2005 5:53 pm ] |
| Post subject: | |
Engine # for Mk1 should be 9F/SA/Y***** Head AEG183 does not exist, AEG163 is correct, or 12A185 Gearbox 22G1128 you quote is a Mk2 (or `possibly' Mini-K) 4 synchro. It was common to change them back then. Original Mk1 1275S used a 22G333 (3 synchro) Hope this helps. |
|
| Author: | FIGJAM [ Sat Mar 05, 2005 6:19 pm ] |
| Post subject: | |
That 8 could be a 6, it's a little hard to tell.I thought I'd be safe and put that AEG 183 there in case it was a code for another model.Thanks for your help. |
|
| Author: | miniron [ Mon Mar 07, 2005 8:07 am ] |
| Post subject: | |
|
Later MK1/1.5 cars used the commonised 22A1288 3 synchro remote change casing. RonR |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|