TheMiniMan wrote:
I use moly
Does your wife know
| ausmini https://www.ausmini.com/forums/ |
|
| ball joint grease https://www.ausmini.com/forums/viewtopic.php?f=2&t=53259 |
Page 1 of 1 |
| Author: | Leighton [ Fri May 15, 2009 5:46 pm ] |
| Post subject: | ball joint grease |
just starting to fit the new ball joints what type and grade grease do you guys recommend for new ball joints? thanks leighton |
|
| Author: | TheMiniMan [ Fri May 15, 2009 5:49 pm ] |
| Post subject: | |
I use moly |
|
| Author: | gafmo [ Fri May 15, 2009 6:05 pm ] |
| Post subject: | |
TheMiniMan wrote: I use moly
Does your wife know
|
|
| Author: | TheMiniMan [ Fri May 15, 2009 6:24 pm ] |
| Post subject: | |
Shhh,,, don`t tell anyone but Molly is a really nice girl & i don`t want her to get it trouble 
|
|
| Author: | Morris 1100 [ Fri May 15, 2009 6:43 pm ] |
| Post subject: | |
TheMiniMan wrote: Shhh,,, don`t tell anyone but Molly is a really nice girl & i don`t want her to get it trouble
Any girl that greases your ball-joints is a keeper. 
|
|
| Author: | TheMiniMan [ Fri May 15, 2009 6:58 pm ] |
| Post subject: | |
she stepped in some mud the other day, so i video-ed it & got some "Dirty-Footage"
|
|
| Author: | drmini in aust [ Fri May 15, 2009 7:23 pm ] |
| Post subject: | |
I use whatever EP2 lithium grease is cheapest in cartridge form. I've found buying them from a BP servo is cheaper now than Supercrap. |
|
| Author: | Drexxle [ Fri May 15, 2009 7:28 pm ] |
| Post subject: | |
what do you use in wheel bearings. I used moly in the ball joints, but i used caltex HTB in the bearings. |
|
| Author: | drmini in aust [ Fri May 15, 2009 7:51 pm ] |
| Post subject: | |
Castrol HTB in the bearings, LMM in CVs. Steering racks I use Castrol LSX90. It's an LSD diff oil, has additives for metal to metal sliding contact- good for where the rack slides on the steel pressure pad. |
|
| Author: | Morris 1100 [ Fri May 15, 2009 8:07 pm ] |
| Post subject: | |
drmini in aust wrote: Steering racks I use Castrol LSX90. It's an LSD diff oil, has additives for metal to metal sliding contact- good for where the rack slides on the steel pressure pad.
That's good, I still have a bottle of LSX90 left over from the HQ race car (but don't HQs run open diffs?   )
|
|
| Author: | simon k [ Fri May 15, 2009 8:41 pm ] |
| Post subject: | |
Morris 1100 wrote: drmini in aust wrote: Steering racks I use Castrol LSX90. It's an LSD diff oil, has additives for metal to metal sliding contact- good for where the rack slides on the steel pressure pad. That's good, I still have a bottle of LSX90 left over from the HQ race car (but don't HQs run open diffs? )I thought they used no oil at all in the diff so it welds itself up after a couple of corners... |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|