8mm, mine are 5
so I have new disks to go on during the rebuild.
Dicko
| ausmini https://www.ausmini.com/forums/ |
|
| MINImum Brake disk thickness https://www.ausmini.com/forums/viewtopic.php?f=2&t=53525 |
Page 1 of 1 |
| Author: | JAK355 [ Sat May 23, 2009 8:51 pm ] |
| Post subject: | MINImum Brake disk thickness |
As above, im doing a bit of maintanance on the 850, just checking what the minimum disk thickness on 7.5" S disks can be before replacement?. cheers Jake |
|
| Author: | d1ck0 [ Sat May 23, 2009 8:53 pm ] |
| Post subject: | |
8mm, mine are 5 so I have new disks to go on during the rebuild.
Dicko |
|
| Author: | JAK355 [ Sat May 23, 2009 9:09 pm ] |
| Post subject: | |
d1ck0 wrote: 8mm, mine are 5
so I have new disks to go on during the rebuild.Dicko Thanks Dicko. im down to 7.8 on one so time to get some new ones. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|