tell niceboy he is gathering them and trying to breed them
| ausmini https://www.ausmini.com/forums/ |
|
| Mini matic box. Chuck or sell 4 $$$ https://www.ausmini.com/forums/viewtopic.php?f=2&t=53546 |
Page 1 of 1 |
| Author: | mini maxx [ Sun May 24, 2009 1:20 pm ] |
| Post subject: | Mini matic box. Chuck or sell 4 $$$ |
Hi all, i have a minimatic box sitting in my shed unused for many years. Is it worth any thing or should i chuck it in the trailer? |
|
| Author: | aaron [ Sun May 24, 2009 1:44 pm ] |
| Post subject: | |
dont throw it out. offer it for nix here if it doesnt go. give it to ur fav mini supplier |
|
| Author: | frednutz&co [ Sun May 24, 2009 2:08 pm ] |
| Post subject: | |
tell niceboy he is gathering them and trying to breed them
|
|
| Author: | bnicho [ Sun May 24, 2009 2:54 pm ] |
| Post subject: | |
Is it Mini-Matic or Morris 1100 / 1300? |
|
| Author: | drmini in aust [ Sun May 24, 2009 3:03 pm ] |
| Post subject: | |
bnicho wrote: Is it Mini-Matic or Morris 1100 / 1300?
What's the difference, apart from oil filter size/shape? I'm not talking about the Rover boxes..... |
|
| Author: | bnicho [ Sun May 24, 2009 3:24 pm ] |
| Post subject: | |
drmini in aust wrote: bnicho wrote: Is it Mini-Matic or Morris 1100 / 1300? What's the difference, apart from oil filter size/shape? I'm not talking about the Rover boxes..... Possibly a lower diff ratio! There are possibly 3 final drive ratios for Autos. 2.76 - late Mini Japan spec SPi (workd out to 3.2ish with 1.15:1 drop gears) 3.2? - usual Mini-Matic and Rover (works out to 3.6ish with 1.15:1 drop gears) Something like a 3.7 or 3.9 final drive in some model of Morris 1100/1300. I'm yet to see one, but want to get hold of one. Then I can run proper Moke sized tyres. |
|
| Author: | mini maxx [ Sun May 24, 2009 3:26 pm ] |
| Post subject: | |
Its a Minimatic 
|
|
| Author: | drmini in aust [ Sun May 24, 2009 3:58 pm ] |
| Post subject: | |
bnicho wrote: drmini in aust wrote: bnicho wrote: Is it Mini-Matic or Morris 1100 / 1300? What's the difference, apart from oil filter size/shape? I'm not talking about the Rover boxes..... Possibly a lower diff ratio! There are possibly 3 final drive ratios for Autos. 2.76 - late Mini Japan spec SPi (workd out to 3.2ish with 1.15:1 drop gears) 3.2? - usual Mini-Matic and Rover (works out to 3.6ish with 1.15:1 drop gears) Something like a 3.7 or 3.9 final drive in some model of Morris 1100/1300. I'm yet to see one, but want to get hold of one. Then I can run proper Moke sized tyres. My MiniMatic books say diff is 3.27:1, but overall ratio 3.76:1. Multiply 3.27 by 1.15, it's pretty close... 
|
|
| Author: | bnicho [ Sun May 24, 2009 6:13 pm ] |
| Post subject: | |
Judging by GPS readings vs revs and taking into account tyre size, I have the 3.27 in there now. (gearing works out around 3.76). I want to go to a lower ratio so I can run 185/70R13 mud+snow tyres when I want to play and use the 185/60 Yokies on the road. At the moment it doesn't have enough torque to pull 185/70 tyres. Maybe I should just supercharge it. 
|
|
| Author: | niceboy1275 [ Sun May 24, 2009 10:31 pm ] |
| Post subject: | |
I don't make them breed Ian, thats just sick.. But yes.. pm is sent. 
|
|
| Author: | Wombat [ Sun May 24, 2009 10:33 pm ] |
| Post subject: | |
I'm looking for an Auto box for my next project |
|
| Author: | bnicho [ Sun May 24, 2009 10:37 pm ] |
| Post subject: | |
Go the Autos, they rock!
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|