ausmini
https://www.ausmini.com/forums/

Wheels/Perth
https://www.ausmini.com/forums/viewtopic.php?f=2&t=5364		 Page 1 of 1
Author:  sean [ Mon Mar 07, 2005 10:15 pm ]
Post subject:  Wheels/Perth
DOes anyone living in Perth have any wide wheels (10 inch) for sale, steel or alloy in any condition
Author:  jill200sx [ Tue Mar 08, 2005 12:18 am ]
Post subject: 
Ive got a set of 10" mags (Delta's) with 165 bridgstone casings, recapped with Bandag retread about 15 years ago. The tyres have been up all that time, never deflated and the rubber should last forever (but no guarrantee ;) )
Minimark was down this way a little while back and said he'd take them but if he doesnt get around to it they are for sale. $200 set. They are perfectly straight, all with centre caps and Im sure there are wheel nuts but only 3 per wheel as I had locknuts that had to be knocked off, so they are in pretty bad shape ;)
I wet n dry sanded them, so they are a dull finish at the moment, but should polish up well with a heap of autosol and elbow grease... tread probably 80-90% all round. Located in Bunbury, and only available if Minimark doesnt take them off my hands, but worth mentioning I guess ;)
Author:  minimark [ Tue Mar 08, 2005 1:52 am ]
Post subject: 
Hi Jill, if your in a hurry i can organise to get them next weekend but prefer the extra 2 weeks so i can bring you a decent spare :D
Sorry Sean I'm very interested in these wheels. :(
Author:  sean [ Tue Mar 08, 2005 4:13 pm ]
Post subject: 
Thats ok Minimark

does anyone else know of any wheels going ? Also when is the next mini swap meet in perth
Author:  jill200sx [ Tue Mar 08, 2005 9:53 pm ]
Post subject: 
minimark wrote:
Hi Jill, if your in a hurry i can organise to get them next weekend but prefer the extra 2 weeks so i can bring you a decent spare :D
Sorry Sean I'm very interested in these wheels. :(


Nah, its ok Mark. Take your time, if I know you definitely want them they can rest in my garage ;)
I'll let you know next time Im coming up to Perth, can deliver.
Author:  BeanMe [ Wed Mar 09, 2005 12:48 am ]
Post subject:  steel rims
hey
i am selling a set of 10 inch steel rims with nuts from my 74 clubman. are in good condition but need new tyres. i am looking between 60-$80. i live in booragoon
Author:  sean [ Wed Mar 09, 2005 11:53 am ]
Post subject: 
How wide are they ?, I already have the standard steel rims, but would be interested if they were wide ones.
Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/