Well MiniKing John Smidt just sent me an interesting PM, he said according to his notes the HG was standard on 1071 Cooper S ,
looks like I,ll be giving John a call , sounds like it will do the job nicely.
| ausmini https://www.ausmini.com/forums/ |
|
| HG SU needle fixed or floating ? https://www.ausmini.com/forums/viewtopic.php?f=2&t=53788 |
Page 1 of 1 |
| Author: | 74snail [ Sun May 31, 2009 4:47 pm ] |
| Post subject: | HG SU needle fixed or floating ? |
I am going to build a warm 1100 and was planning on using a HA fixed needle in a 1 1/2 SU and was researching a richer alternative to the HA , on the online SU chart I,m using it lists the HG which has a richer profile but I,m not sure if its fixed or floating, can anyone assist ? |
|
| Author: | simon k [ Sun May 31, 2009 4:57 pm ] |
| Post subject: | |
should be fixed - Midel told me the 3 letter ones are floating, but ring them and ask, or whoever you're buying it off |
|
| Author: | 74snail [ Sun May 31, 2009 5:15 pm ] |
| Post subject: | |
Thanks Simon, I may have to give Larry at MiniSpares a call, he was able to get me the HA so the HG should'nt be a problem, the only information I,ve got about the HG is that the guys in MG 1100's liked the HG when they switched to twin 1 1/4 SU's and a bigger cam for Sports Touring Events ( this was translated from French so I may have lost something in translation ) |
|
| Author: | 74snail [ Sun May 31, 2009 6:18 pm ] |
| Post subject: | |
Well MiniKing John Smidt just sent me an interesting PM, he said according to his notes the HG was standard on 1071 Cooper S , looks like I,ll be giving John a call , sounds like it will do the job nicely.
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|