| ausmini https://www.ausmini.com/forums/ |
|
| after info on a auto eng https://www.ausmini.com/forums/viewtopic.php?f=2&t=54551 |
Page 1 of 1 |
| Author: | david rosenthal [ Wed Jun 24, 2009 1:24 am ] |
| Post subject: | after info on a auto eng |
I have found a 1100 eng eng no. 10AR/*****[lost the bit of paper I wrote it on] The eng set-up is to suit mini not 1100 with 1 1/2"carby and spicer drive flanges.Does this number prefix refer to a mini matic. I am not into sludge boxes but if some one is then I can make inquiries about price etc. |
|
| Author: | drmini in aust [ Wed Jun 24, 2009 11:37 am ] |
| Post subject: | |
MiniMatics here never got the 1098 auto they are all 998s. It might be a Morris 1100 auto, I'm sure M1100 will know for sure. |
|
| Author: | Wombat [ Wed Jun 24, 2009 12:26 pm ] |
| Post subject: | |
I have a 1275 Auto what would that have come out of? |
|
| Author: | drmini in aust [ Wed Jun 24, 2009 12:29 pm ] |
| Post subject: | |
Wombat wrote: I have a 1275 Auto what would that have come out of?
Morris 1100S auto (12H169/H), or Morris 1300 auto (12YE/A/H). |
|
| Author: | bnicho [ Wed Jun 24, 2009 12:34 pm ] |
| Post subject: | |
Yep, it's a Morris 1100 Auto with that number. Some 1100 Autos (maybe all) have hardy spicers and they all have 1.5 inch carbies. I don't need another one, will soon have a 1275 A+ Auto spare. 
Wombat, 1275 Autos came out in the Morris 1300 Auto and Morris 1100S Auto. Also various overseas models such as Metros, Allegros etc. |
|
| Author: | Wombat [ Wed Jun 24, 2009 12:35 pm ] |
| Post subject: | |
drmini in aust wrote: Wombat wrote: I have a 1275 Auto what would that have come out of? Morris 1100S auto (12H169/H), or Morris 1300 auto (12YE/A/H). Duh! that's right the seller told me it came out of a 1300  - getting oldtimers disease.
|
|
| Author: | david rosenthal [ Wed Jun 24, 2009 2:20 pm ] |
| Post subject: | |
sounds like this eng is a mix and match as well. It is living in a mini now. can not blame it for up-grading from a 1100 to a mini 
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|