ausmini
https://www.ausmini.com/forums/

998 crank
https://www.ausmini.com/forums/viewtopic.php?f=2&t=55165		 Page 1 of 1
Author:  NAV [ Wed Jul 15, 2009 10:25 pm ]
Post subject:  998 crank
I've found out recently that the crank in NAV's 998 is rooted. A good mate has an A+ 998 kicking around he'll donate to me. Are the cranks interchangeable? If not what are the differences or changes needed to make it fit a non A+ block and gearbox?
Author:  aaron [ Wed Jul 15, 2009 10:36 pm ]
Post subject:  Re: 998 crank
NAV wrote:
I've found out recently that the crank in NAV's 998 is rooted. A good mate has an A+ 998 kicking around he'll donate to me. Are the cranks interchangeable? If not what are the differences or changes needed to make it fit a non A+ block and gearbox?


If your nice i will post you a 20 20 nitrided crank, good good.....
Author:  drmini in aust [ Wed Jul 15, 2009 10:46 pm ]
Post subject:  Re: 998 crank
NAV wrote:
I've found out recently that the crank in NAV's 998 is rooted. A good mate has an A+ 998 kicking around he'll donate to me. Are the cranks interchangeable? If not what are the differences or changes needed to make it fit a non A+ block and gearbox?

To answer your original question, yes the cranks are interchangeable.
Author:  mini-dunger [ Wed Jul 15, 2009 10:56 pm ]
Post subject: 
gimme 200$ and I will wedge, grind and balance one of my spares, think it will only be 010 , 010 undersize
Author:  NAV [ Wed Jul 15, 2009 11:03 pm ]
Post subject: 
aaron wrote:
If your nice I will post you a 20 20 nitrided crank, good good.....

Really? Cheers Aaron. I love this Ausmini community, there is always someone willing to get behind another mini nutter and help. What would you like in exchange for it? I need a crank soon to NAV back on the road, and with any luck to the muster this year.

drmini in aust wrote:
To answer your original question, yes the cranks are interchangeable.


Is it a straight swap over if I use my existing primary gear?

mini-dunger wrote:
gimme 200$ and I will wedge, grind and balance one of my spares, think it will only be 010 , 010 undersize


Thanks for the offer. I'll get in touch if my other options fall through first.
Author:  TheMiniMan [ Thu Jul 16, 2009 8:28 am ]
Post subject: 
NAV wrote:

drmini in aust wrote:
To answer your original question, yes the cranks are interchangeable.


Is it a straight swap over if I use my existing primary gear? .


Yep :-)
Author:  NAV [ Thu Jul 16, 2009 8:57 am ]
Post subject: 
TheMiniMan wrote:
NAV wrote:

drmini in aust wrote:
To answer your original question, yes the cranks are interchangeable.


Is it a straight swap over if I use my existing primary gear? .


Yep :-)


I love it when there is a simple answer, Cheers Matt.
Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/