Brian..Stop it will you
Is thier any reason why would want non-magnetic stainless steel
| ausmini https://www.ausmini.com/forums/ |
|
| 2 inch exhaust question type of stainless required?? https://www.ausmini.com/forums/viewtopic.php?f=2&t=55486 |
Page 1 of 1 |
| Author: | minifreak1 [ Mon Jul 27, 2009 7:31 am ] |
| Post subject: | 2 inch exhaust question type of stainless required?? |
Hi all im looking at buying some 2 inch stainless steel pipe to replace my standard one. just curious on what type is best..if any the stuff i was looking at is 316 marine grade Outside Diameter 50.8mm Wall Thickness 1.6mm Mirror Finish it looks great and bling factor is there...as i am building this car for semi show.. if not wat should i be looking at... Let me know.. |
|
| Author: | simon k [ Mon Jul 27, 2009 12:25 pm ] |
| Post subject: | |
google is your friend.... 304 looks to be the go http://www.classictube.com/products_exhaust.asp or ring an exhaust shop |
|
| Author: | EAB [ Mon Jul 27, 2009 1:44 pm ] |
| Post subject: | |
304 is the stuff you want. its better to bend and preffered by most exhaust places. i got mine from GEORDI steel out near moorabin they were really good. $45 for 3m of 1.5" and two reducers. |
|
| Author: | gafmo [ Mon Jul 27, 2009 8:02 pm ] |
| Post subject: | |
Brian..Stop it will you
Is thier any reason why would want non-magnetic stainless steel
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|