Smarty wrote:
They are getting harder to find, so if you find a good one for $110 buy it.
Better hang on to mine in case I need it 'one day'
| ausmini https://www.ausmini.com/forums/ |
|
| cost of gear selector case.... https://www.ausmini.com/forums/viewtopic.php?f=2&t=55537 |
Page 1 of 1 |
| Author: | minifreak1 [ Tue Jul 28, 2009 4:01 pm ] |
| Post subject: | cost of gear selector case.... |
just curious on how much one should pay for a good 2nd hand one ??? so far ive been told $110?? your thourghts?? |
|
| Author: | Lillee [ Tue Jul 28, 2009 4:12 pm ] |
| Post subject: | |
What is a gear selector case? you mean a rod change/remote change arm that sticks out from the gearbox and is under the gearstick? |
|
| Author: | minifreak1 [ Wed Jul 29, 2009 7:33 am ] |
| Post subject: | |
the big long alloy casing thingymebob that conects to the gear box and goes to the gear stick....pritty sure its called a gear selector case...???? i dont have the rods ... |
|
| Author: | Smarty [ Wed Jul 29, 2009 8:32 am ] |
| Post subject: | |
They are getting harder to find, so if you find a good one for $110 buy it. |
|
| Author: | Wombat [ Wed Jul 29, 2009 9:02 am ] |
| Post subject: | |
Smarty wrote: They are getting harder to find, so if you find a good one for $110 buy it.
Better hang on to mine in case I need it 'one day'
|
|
| Author: | Mike_Byron [ Wed Jul 29, 2009 10:25 am ] |
| Post subject: | |
I have several - pm me if you cant find one locally Mike |
|
| Author: | 850man [ Wed Jul 29, 2009 10:50 am ] |
| Post subject: | |
Its called a "remote" housing. Part no. 22A250 |
|
| Author: | TheMiniMan [ Wed Jul 29, 2009 11:31 am ] |
| Post subject: | |
I have plenty of them,,, 
if anyone needs one then give me a bell (0407 135 656) , i get $85 for them normally |
|
| Author: | minifreak1 [ Wed Jul 29, 2009 1:46 pm ] |
| Post subject: | |
thanks for the replys... the one i found for $110 has been rebuilt to as new as possible....all new bolts provided etc..as wel if its sold ill contact some of you for a replacement. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|