CRV drive train...
| ausmini https://www.ausmini.com/forums/ |
|
| The AWD Mini has arrived https://www.ausmini.com/forums/viewtopic.php?f=2&t=55560 |
Page 1 of 1 |
| Author: | IwannaMini [ Wed Jul 29, 2009 10:40 am ] |
| Post subject: | The AWD Mini has arrived |
http://www.autoblog.com/2009/07/28/the- ... a-w-video/ druels.................. |
|
| Author: | awdmoke [ Wed Jul 29, 2009 10:46 am ] |
| Post subject: | |
It arrived three months ago: http://118.127.11.148/~ausmini/forums/viewtopic.php?t=52682 (that thread has a link to the Superfastminis web site) |
|
| Author: | IwannaMini [ Wed Jul 29, 2009 10:59 am ] |
| Post subject: | |
i only check mainstream news......... still... me likey and me wanty... |
|
| Author: | blue_deluxe [ Wed Jul 29, 2009 11:08 am ] |
| Post subject: | |
That really isnt that expensive. Suppose the engine and diffs would set you back a bit. |
|
| Author: | cush [ Wed Jul 29, 2009 11:09 am ] |
| Post subject: | |
CRV drive train...
|
|
| Author: | Mokesta [ Wed Jul 29, 2009 1:46 pm ] |
| Post subject: | |
The rear diff and suspension is NA/NB series MX-5. If you go for the 1600CC, open centre diff version, then it will be cheap as chips. Get the Torsen LSD and you are up for a bit of $. THe MX-5 rear end is over strong and heavy for the mini. I would reckon that re-making the wishbones from tube could save lots of weight. M |
|
| Author: | blue_deluxe [ Wed Jul 29, 2009 2:15 pm ] |
| Post subject: | |
Hmmm, I know someone with an NA 1.6 mx5. Going to be upgrading to an lsd soon, might have to take it off his hands then. |
|
| Author: | poeee [ Wed Jul 29, 2009 2:22 pm ] |
| Post subject: | |
Great piece of kit there! Not my thing, though. Looks awesome in primer and black. 
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|