| ausmini https://www.ausmini.com/forums/ |
|
| Fitting a bigger master cylinder https://www.ausmini.com/forums/viewtopic.php?f=2&t=55566 |
Page 1 of 1 |
| Author: | blue_deluxe [ Wed Jul 29, 2009 11:54 am ] |
| Post subject: | Fitting a bigger master cylinder |
Hi, Im getting an afetrmarket pedal box to fit to my black clubby with a 4efte conversion. Im going to go with the standard starlet clutch bore size. What do people reccomend for the brake sizes? The front and rears are on separate circuits. The company reccomend .7 rear and .625 front. Ive not decided on what rear brakes im going to run, either KAD rear discs or convert the starlet ones. At the front im running metro turbo vented 4 pots. Thanks, Joe |
|
| Author: | awdmoke [ Wed Jul 29, 2009 12:03 pm ] |
| Post subject: | |
Your supplier will be able to advise you better. Without details of the aftermarket box (i.e. pivot lenghts for the pedal) I wouldn't even guess. |
|
| Author: | blue_deluxe [ Wed Jul 29, 2009 12:09 pm ] |
| Post subject: | |
Okay, Do you know what calculations you have to do to find out? Ive tried searching but couldnt get anything. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|