| ausmini https://www.ausmini.com/forums/ |
|
| Spit! https://www.ausmini.com/forums/viewtopic.php?f=2&t=55637 |
Page 1 of 1 |
| Author: | travhill_78 [ Fri Jul 31, 2009 7:11 pm ] |
| Post subject: | Spit! |
Finally finished the spit. Got the car off the ground. All looking sweet untill.... Went to turn car over and the bar that joins the two stands underneath catches the edge of the minis floor by about 20mm Have to now get underneath the car to lower the bar. I wanted to avoid getting underneath the car which is why you build a spit in the first place Oh well cant win them all  
|
|
| Author: | gafmo [ Fri Jul 31, 2009 8:18 pm ] |
| Post subject: | |
okay get your camera out and sow us a pic..Bugger |
|
| Author: | Drexxle [ Fri Jul 31, 2009 10:05 pm ] |
| Post subject: | |
cut and weld in an extra 30mm 
|
|
| Author: | Tombo [ Fri Jul 31, 2009 10:42 pm ] |
| Post subject: | |
|
|
| Author: | mini maxx [ Fri Jul 31, 2009 11:13 pm ] |
| Post subject: | |
Dont you just hate it when that happens 
|
|
| Author: | DTrain [ Sat Aug 01, 2009 12:25 am ] |
| Post subject: | |
measure twice, cut once |
|
| Author: | BBY755 [ Sat Aug 01, 2009 9:41 am ] |
| Post subject: | |
For those who have measured once and had to cut twice,....... You will only ever do it one time! 
|
|
| Author: | Angusdog [ Sat Aug 01, 2009 3:40 pm ] |
| Post subject: | |
"I've cut it twice and it's still too short..." |
|
| Author: | Morris 1100 [ Sat Aug 01, 2009 5:15 pm ] |
| Post subject: | |
Angusdog wrote: "I've cut it twice and it's still too short..."
Well cut it again.  Do I have to tell you blokes everything? 
|
|
| Author: | travhill_78 [ Sat Aug 01, 2009 7:04 pm ] |
| Post subject: | |
Yeah thanx everyone!! Gonna lower it 30mm!!
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|