Huh
The adjustment is on the backplate of the drum at the 12 O'clock position.
| ausmini https://www.ausmini.com/forums/ |
|
| Rear Drum Question https://www.ausmini.com/forums/viewtopic.php?f=2&t=55780 |
Page 1 of 1 |
| Author: | mini-dunger [ Wed Aug 05, 2009 5:59 pm ] |
| Post subject: | Rear Drum Question |
hi all I was wondering whether or not my rear drums should have a hole in them for adjusting the shoes? I need to do this and it dont make sense to pull the drum off the shoes adjust then somehow get the drum back on to test? Would it be a stupid idea to mill a hole in them ? |
|
| Author: | Mick [ Wed Aug 05, 2009 6:06 pm ] |
| Post subject: | |
| Huh
The adjustment is on the backplate of the drum at the 12 O'clock position. |
|
| Author: | mini maxx [ Wed Aug 05, 2009 6:14 pm ] |
| Post subject: | |
Yes it would be a Stupid idea drilling holes in yer drums when there is a nice hole in the backing plate for adjusting brakes |
|
| Author: | mini-dunger [ Wed Aug 05, 2009 7:26 pm ] |
| Post subject: | |
oh its funny the crap you learn when you know nothing that's how I was adjusting them I would pull the drum off and turn the cam thing and then put the drum back on........ And would you believe I once put the crank in back to front? |
|
| Author: | mini-dunger [ Wed Aug 05, 2009 7:30 pm ] |
| Post subject: | |
the only drum brakes I have and experience with have had an adjuster hole in the front (think Camry) |
|
| Author: | Mick [ Wed Aug 05, 2009 7:37 pm ] |
| Post subject: | |
Now that would be useful.... |
|
| Author: | i got a mini [ Wed Aug 05, 2009 7:39 pm ] |
| Post subject: | |
haha yer u might go backwards haha |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|