David, some time ago you showed the need for stable air for the vent that SUs slides need to work properly. http://www.ausmini.com/forums/viewtopic ... highlight=

Have look at these ram tubes!......Where do they put the vent for the slide?

there nice....i like

_________________
started a new project...there goes all my free time....

Beefcake!

_________________
SooperDooperMiniCooperExpertEngineering

All garage work involves equal measures of enthusiasm, ingenuity and a fair degree of irresponsibility.

not unlike mine, and they probably did the same thing as me when I made them a couple of months ago. I bored the vent hole into the body, and drilled through the side to it, the vent hole is under the filter

they are the same profile as type 8 on page 57 of big yellow Vizard - opens up at 7* over 1.5" with 1/4" radius (ish)

I really wanted something I could mount some UniFilter socks on, the ram is a bonus...

_________________
did I tell you that I won a trophy?

Neat, practical and very cute

dunno about neat, but the other two describe me fairly well.... dunno what that's got to do with ram tubes though

_________________
did I tell you that I won a trophy?

i want some!

thems very pretty

_________________
Here am I sitting in my tin can far above the Moon
Planet Earth is blue and there's nothing I can do...



“A turbo: exhaust gasses go into the turbocharger and spin it, witchcraft happens and you go faster.” - Jeremy Clarkson

MG rocket, It is a bit hard to see from the pics but I would think that there would be a hole something like the ones that Simon has made.
Same idea but different construction

Mine were designed to fit inside a Ramflo air filter.

_________________
Research is the difference between speculation and investment. Anyone who copys some one else will always be second
www.minisprintgt.com