ausmini
https://www.ausmini.com/forums/

electric fuel pump and gauges.
https://www.ausmini.com/forums/viewtopic.php?f=2&t=56181		 Page 1 of 1
Author:  Leighton [ Tue Aug 18, 2009 5:52 pm ]
Post subject:  electric fuel pump and gauges.
ive bought an electric fuel pump but i have no idea how to put it in and get it working. where should it be located?
do i need any extra fittings like fuel hoses/pipes?

i also need to Know about my eletric gauges. ive bought 3 smiths gauges (oil p., Volts, water temp) where can i get the fittings and wiring for these, i have also heard you can get a t-piece connection for the oil p and have a light in there too, where can i get all these bits and how do i wire them up?

thankyou,

Leighton
Author:  i got a mini [ Tue Aug 18, 2009 5:56 pm ]
Post subject: 
depends what type of car u got but electric check under the back subframe in the corner near the back left wheel
Author:  Leighton [ Tue Aug 18, 2009 5:58 pm ]
Post subject: 
sorry i havent put it in yet, is it meant to go under the fuel tank?
Author:  i got a mini [ Tue Aug 18, 2009 6:30 pm ]
Post subject: 
yer on the outside of car jack the back up stick ya head under there and up in the cornere will be ya old one if u have electric
Author:  i got a mini [ Tue Aug 18, 2009 6:33 pm ]
Post subject: 
Image


thats were it should be lol mine dont have a electric but that is were it is ment to go
Author:  tinymorris1969 [ Tue Aug 18, 2009 6:36 pm ]
Post subject: 
ill post a pic for u when i get home mate. its not hard to do, took me about 15 mins to connect and wire up.
Author:  minifreak1 [ Tue Aug 18, 2009 7:17 pm ]
Post subject: 
this is how i did mine....was told to use one rubber mount but i did two.

Image

shes not wired up yet as i have no loom....but its one wire to earth and other to main power on ignition ie...turn key and she gets power.....well i think thats right ??
Author:  drmini in aust [ Tue Aug 18, 2009 9:12 pm ]
Post subject: 
They are quieter if mounted on a Mini front exhaust pipe mounting.
The 2 bolt holes line up perfect... :P
Image
Author:  Leighton [ Tue Aug 18, 2009 9:24 pm ]
Post subject: 
ok thanks for the replies. do i need any extra fuel hose/pipe lengths?
Author:  drmini in aust [ Tue Aug 18, 2009 9:33 pm ]
Post subject: 
Yes. 1 metre is plenty, get decent hoseclamps that fit properly (no stiff wormdrive ones).
I use USA made fuel hose, it doesn't go hard when using unleaded fuel.
Author:  Leighton [ Tue Aug 18, 2009 9:42 pm ]
Post subject: 
thankyou for your help in both threads :wink:
Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/