ausmini
https://www.ausmini.com/forums/

Official NSW MRC Dyno Day Results 2009
https://www.ausmini.com/forums/viewtopic.php?f=2&t=56858		 Page 1 of 1
Author:  Mini Mad [ Tue Sep 08, 2009 8:10 pm ]
Post subject:  Official NSW MRC Dyno Day Results 2009
Thanks to all for turning up :lol: it was looking a bit scary at the end there with the last minute dropouts but it all came good in the end with a nice relaxed atmosphere and even time to do a little tuning on a few cars.

BIG thanks to Graham Russell from Russell Engineering and Greig from Mini Classic for supporting the event through the awesome trophies and Graham for manning the BBQ and feeding us all.

Also thanks to the guys at MRC, Mark did a great job especially considering he was on his own and had to call a mate and his wife in for support on the day.

It was great to see the first year that small blocks cracked the over 50HP mark with both Gerg's mild mannered 998 and Julie/Wayne's beast of a 1220 with 60HP!

Rob's 848cc Sports 850 with 47HP is impressive to say the least.

Here are the results:

Bold is first and runner up is underlined.

Small Block 850
Robert BMC848 47

Small Block 998
GR ART16U 67.5
Gerg AV69PF 53.9
Aaron HB10AB 32.9

Small Block 1098
Wayne 38107.H 60
Joe DPO187 35.8
Dennis CL77UB 34.3

Big Block
Dr Mini UFE278 81
Michaelb 21627H 68.1
Marlene DVS14U 62.4
Tyson WLD12U 60.7
Steve BLR806 58
Grant F GF071 46.9
Marcello BIP11T 32.9

Hybrid
Ray DUS.13S 175.9
Josh SML18U 160.7
Darcy AN22AH 103.2
Nathan AM47YC 74.8

Turbo A-Series
Grant RED850 124.7

Other
Brian AYP81U 169.3 Polo GTi
Ben BGB79Y 106.5 BMW
Aaron Smith AO69YN 65 Daihatsu Mira 660cc Turbo[/b]
Author:  gerg [ Tue Sep 08, 2009 8:36 pm ]
Post subject: 
Thanks Josh for putting up the results, it was a great day 8) , and boy, GR knows how to wake the small bores up 8) :lol: , go the mighty 998. 8)
Author:  drmini in aust [ Tue Sep 08, 2009 8:54 pm ]
Post subject: 
Was a great day. Nothing like the sound of an A series screaming and trying to get out. :P

GR knows how to make a bigblock go, too. The only reason my 1360 got 81HP (and 86.6 last time it ran) is his magic RE282 cam. It's worth 10HP over the RE13 I had in before. Sadly, this cam grind is now NLA, but he has another in the pipeline...:mrgreen:
Author:  sgc [ Tue Sep 08, 2009 8:58 pm ]
Post subject: 
drmini in aust wrote:
Sadly, this cam grind is now NLA


You've mentioned that before, but what's to stop him taking one of the few (such as yours) and making another master from it?
Author:  drmini in aust [ Tue Sep 08, 2009 9:06 pm ]
Post subject: 
If Graham had a `just ground' 282 cam (no, he doesn't) he could do this.

My cam has now done 11,000 MILES. It would have some wear.
Any profile errors get magnified when a master is cut. The master on his grinder is 5x bigger in profile than a camshaft lobe.
The errors from the master then get transferred onto the new cams being ground. This is why copying off pre-loved cams seldom gives great results.
Author:  aaron [ Tue Sep 08, 2009 9:36 pm ]
Post subject: 
he's working on something new...... Watch this space....
Author:  Dennis Maher [ Tue Sep 08, 2009 9:57 pm ]
Post subject: 
Josh, thanks for organising the event - my first but I'll be back next year.
Greg (gerg) thanks for getting me onto the list, I'd only tried about 10 times.

Dennis
Author:  gerg [ Wed Sep 09, 2009 7:48 pm ]
Post subject: 
Dennis Maher wrote:
Josh, thanks for organising the event - my first but I'll be back next year.
Greg (gerg) thanks for getting me onto the list, I'd only tried about 10 times.

Dennis


No worries Dennis, it was good to see you there :D , oh and by the way GR has finaly named the new cam RE83 8) , so far it's the ducks guts and he is already developing it further..... :shock: , as Aaron said, watch this space..... :D
Author:  drmini in aust [ Wed Sep 09, 2009 7:52 pm ]
Post subject: 
Oooooooooo I better get me one for the 1412 stroker I don't use yet...:mrgreen:
He better hand deliver the cam master for hardening, this time...
Author:  michaelb [ Thu Sep 10, 2009 7:57 pm ]
Post subject: 
Fantastic day, and great results for my car which appears to have 3 more hp than last year. Only change was a nice new GR RE13 cam.. :D
Id be interested in one of the new GR cams if they provide another 10hp :wink:
Author:  Mini Mad [ Fri Sep 11, 2009 11:47 am ]
Post subject: 
Hey Michael, we've got your trophy at home are you coming to Gannons?
Author:  michaelb [ Sat Sep 12, 2009 6:37 pm ]
Post subject: 
Hey Joshua,

Sorry I wont be a Gannons this year. I will have to catch up with you later.

Michael
Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/