Hey doc... thanks for letting me know that method of measuring the stroke...
Here
i did mine just then and (even with my slightly rough methods) i came out with a measurement of 86mm..
woot
looks like i'm in the 1100 club
| ausmini https://www.ausmini.com/forums/ |
|
| Thanks Doc https://www.ausmini.com/forums/viewtopic.php?f=2&t=5713 |
Page 1 of 2 |
| Author: | cush [ Mon Mar 21, 2005 6:27 pm ] |
| Post subject: | Thanks Doc |
Hey doc... thanks for letting me know that method of measuring the stroke... Here
i did mine just then and (even with my slightly rough methods) i came out with a measurement of 86mm.. woot
looks like i'm in the 1100 club
|
|
| Author: | bigel nigel [ Mon Mar 21, 2005 6:29 pm ] |
| Post subject: | |
no worries cushy  
|
|
| Author: | drmini in aust [ Mon Mar 21, 2005 6:32 pm ] |
| Post subject: | |
Actually it's 83.7mm- your measurement wire wasn't vertical.. Agreed- it's a 1098.
|
|
| Author: | FatMaserati [ Mon Mar 21, 2005 6:34 pm ] |
| Post subject: | |
I had nothing to do with this stroke measurement, but I'd like to say congratulations... for some reason...  
|
|
| Author: | dr trim [ Mon Mar 21, 2005 6:48 pm ] |
| Post subject: | |
i didn't think u'd need the doc to help u measure ur stroke.. whatever rides ur bike.. 
|
|
| Author: | willy [ Mon Mar 21, 2005 6:50 pm ] |
| Post subject: | |
Thats awful cushy. Poor kid with only a 8.6cm stroke. There's pills for that stuff, you know. |
|
| Author: | gafmo [ Mon Mar 21, 2005 7:56 pm ] |
| Post subject: | |
Dam I came in this Convo to Late 
|
|
| Author: | bigel nigel [ Mon Mar 21, 2005 8:00 pm ] |
| Post subject: | |
yep this topic lost all meaning as soon as i posted my first reply
|
|
| Author: | J_A_M [ Mon Mar 21, 2005 8:47 pm ] |
| Post subject: | |
oh darn...  I am getting a 1275 now.....
|
|
| Author: | cush [ Mon Mar 21, 2005 10:06 pm ] |
| Post subject: | |
drmini in aust wrote: Actually it's 83.7mm- your measurement wire wasn't vertical..
i know it's an 83mm stroke that's why when i got a measurement of 86mm i knew it was a 1098..... i said it was a rough measurement
the old geezer i bought it off was right..
geez i'm st(r)oked will,,, at 86mm it's longer than your stroke
|
|
| Author: | J_A_M [ Tue Mar 22, 2005 7:54 am ] |
| Post subject: | |
yea....and i bet you stroke a lot Cushy....
|
|
| Author: | miniVan [ Tue Mar 22, 2005 10:15 am ] |
| Post subject: | |
well seeing as this convo actually looks like it should have been a PM.. (thankyou without an actual explanation in the first place) so.. i'm guessing here.. take the spark plug out.. put the piston at TDC.. shove a wire down the hole to touch the piston? put piston at BDC and measure with wire again trying to make the wire straight as possible on her way down? maybe we could post what measurements it should be?? should this post be at the bottom of another? |
|
| Author: | kazjim [ Tue Mar 22, 2005 10:27 am ] |
| Post subject: | |
Stroking is Nice, But I'd rather be Blown ...... 
J |
|
| Author: | Marvin [ Tue Mar 22, 2005 10:34 am ] |
| Post subject: | |
You're a sick puppy kazjim
|
|
| Author: | kazjim [ Tue Mar 22, 2005 10:36 am ] |
| Post subject: | |
Vroom, Vroom..... Whiiiiiiiirrrrrr... pSchhhhhhhhht.....
J |
|
| Page 1 of 2 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|