| ausmini https://www.ausmini.com/forums/ |
|
| Inertia seat belts for 67 Deluxe https://www.ausmini.com/forums/viewtopic.php?f=2&t=57516 |
Page 1 of 1 |
| Author: | cd [ Wed Sep 30, 2009 10:42 pm ] |
| Post subject: | Inertia seat belts for 67 Deluxe |
Has any got inertia seat belts on a round nose that doesnt hit the seat? If so part No & from where? Craig |
|
| Author: | superSeven [ Thu Oct 01, 2009 2:15 am ] |
| Post subject: | |
I do, but don't have part number handy sorry. I believe they available from major retailers (minis plus, minisport etc). Depends on what seats you have too probably! I have clubman seats, and clearance is very very close indeed. |
|
| Author: | drmini in aust [ Thu Oct 01, 2009 7:32 am ] |
| Post subject: | |
Craig, I used Klippan 1512. You have to redrill the reel mounting hole closer to the reel or the reel fouls on the door pocket. I've run them for 10 years in my `70 Matic, no problem. PM sent. 
<edit> These belts cleared roundy seats, they also clear my Cobra Classics. They do NOT clear Clubby seats which are wider in the base frame. |
|
| Author: | marc2131 [ Thu Oct 01, 2009 9:04 am ] |
| Post subject: | |
I have inertia seat belts in mine too, with clubman seats. LIke others the clearance is very close. Personally I am a bit tired of it and prefer normal non-inertia seat belts. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|