I want to have the subframes sandblasted and powder coated.
Does any one have a favourite or recommended business for this work?
Prefer some where near the north shore if possible..
| ausmini https://www.ausmini.com/forums/ |
|
| Sandblasting and Powder coating in Sydney https://www.ausmini.com/forums/viewtopic.php?f=2&t=57521 |
Page 1 of 1 |
| Author: | michaelb [ Thu Oct 01, 2009 11:34 am ] |
| Post subject: | Sandblasting and Powder coating in Sydney |
I want to have the subframes sandblasted and powder coated. Does any one have a favourite or recommended business for this work? Prefer some where near the north shore if possible..
|
|
| Author: | Phat Kat [ Thu Oct 01, 2009 12:00 pm ] |
| Post subject: | |
Sydney Soda Blasting, they're in Seven Hills which isn't quiet Newport I know, but they're very good and they're aren't total monkeys. They do sand and soda. Just around the corner from them in Abbot Rd (end of the M2) is powder coater I have used as well. I can get their name if it gets dire. Good luck |
|
| Author: | 1310/71 [ Thu Oct 01, 2009 4:18 pm ] |
| Post subject: | |
also nearby is Claude at Impact Glass Beading in Romford Place (just off Sunnyholt rd) Blacktown. He subbies out powdercoating to Link Powdercoating just over the road in Kings Park, or you can go to Link direct for the powdercoating part yourself. A few streets away again is Redistrip who do a chemical strip. I've used all three at various times with no issues. KB |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|