| ausmini https://www.ausmini.com/forums/ |
|
| Speedo cable position https://www.ausmini.com/forums/viewtopic.php?f=2&t=58147 |
Page 1 of 1 |
| Author: | Kennomini [ Thu Oct 22, 2009 9:02 pm ] |
| Post subject: | Speedo cable position |
I have a 63 Morris with a 3 gauge clubman dash in it and the speedo cable is rubbing on my K&N filter because I have the speedo coming through the center hole in the fire wall. So, in a Clubman where should the speedo cable come through the fire wall? |
|
| Author: | Tombo [ Thu Oct 22, 2009 9:28 pm ] |
| Post subject: | |
On my clubbies it comes through the firewall near the master cyl's then virtually runs along the firewall behind the carb. |
|
| Author: | mini maxx [ Thu Oct 22, 2009 11:26 pm ] |
| Post subject: | |
Same as Veras speedo cable |
|
| Author: | GT mowog [ Fri Oct 23, 2009 6:37 am ] |
| Post subject: | |
This may also help;- http://www.ausmini.com/forums/viewtopic.php?t=58134 |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|