| ausmini https://www.ausmini.com/forums/ |
|
| SU Needles... https://www.ausmini.com/forums/viewtopic.php?f=2&t=5819 |
Page 1 of 2 |
| Author: | drmini in aust [ Fri Mar 25, 2005 4:58 pm ] |
| Post subject: | SU Needles... |
OK, now Mini-Ha-Ha is a goer I'm bunging a pair of HS4s on Barney's 1293. He already has a 270* cam, headwork & Toyota rockers. These HS4 carbs have CP4 needles in 'em, (off a 1380) they look bloody rich to me.. Based on the dyno day I think I need something like no 6.. Anybody got an SU needle chart handy? Will WinSU program work with Win XP? Looked on SU Midel's site, boy, it is useless! At least their old site worked... 
|
|
| Author: | EST-071 [ Fri Mar 25, 2005 5:14 pm ] |
| Post subject: | |
Yes, WINSU will work on XP. Pete |
|
| Author: | Boostedmini [ Fri Mar 25, 2005 6:14 pm ] |
| Post subject: | |
Kev, i have a an SU chart at home with all 90 and 100 thou needles listed. i could drop it off if you like |
|
| Author: | drmini in aust [ Fri Mar 25, 2005 6:26 pm ] |
| Post subject: | |
Boostedmini wrote: Kev, Great stuff Brad!
i have a an SU chart at home with all 90 and 100 thou needles listed. i could drop it off if you like Thankee muchly. 
Another beer I owe you... 
I'm rekitting these twin SUs at the moment, so I need some needles `soon'... 
Why not fit another Dellorto? Too much friggin' noise, she reckons...! |
|
| Author: | smithy [ Fri Mar 25, 2005 8:54 pm ] |
| Post subject: | Needling worries. |
CP4 starts off leaner than a 6 then is darn close for a while then gets richer up the top end but not what I'd call a lot. I have just got myself a BCE which I have hopes for. Starts out a bit richer than the CP4 then leans off by comparison at the top end. |
|
| Author: | drmini in aust [ Fri Mar 25, 2005 9:15 pm ] |
| Post subject: | |
Thanks Smithy- I'll try the CP4s first. Carbs have Ramflo filters on them. Springs look like they may be blue ones.. hard to tell after a zillion years.
|
|
| Author: | kazjim [ Fri Mar 25, 2005 9:21 pm ] |
| Post subject: | |
"Great stuff Brad! " you mean.. Grant ? Close ! J |
|
| Author: | gafmo [ Fri Mar 25, 2005 9:23 pm ] |
| Post subject: | |
I'll check the one's I have foryou tomorrow
|
|
| Author: | drmini in aust [ Fri Mar 25, 2005 9:34 pm ] |
| Post subject: | |
kazjim wrote: "Great stuff Brad! "
you mean.. Grant ? Close ! J Oops! 
Yeah sorry, Grant! Beer offer still open! 
|
|
| Author: | poeee [ Sat Mar 26, 2005 9:08 am ] |
| Post subject: | |
WinSU works with XP. Maybe you have to download the latest version. |
|
| Author: | gafmo [ Sat Mar 26, 2005 11:07 am ] |
| Post subject: | |
poeee wrote: WinSU works with XP.
Maybe you have to download the latest version. 1.52 is the latest version |
|
| Author: | CPOCSM [ Sun Mar 27, 2005 6:38 am ] |
| Post subject: | |
M needles are stock S for twin 1.5in setup so use the profile as a benchmark and go from there. It is all better as you go up...lol Rob Forsyth Miniot!! |
|
| Author: | Boostedmini [ Sun Mar 27, 2005 6:42 pm ] |
| Post subject: | |
Thats ok Kev, give me a bell tomorrow 0418 984 009 when you are ok with me to drop it off. i also have a few spare needles too i will drop off with it. |
|
| Author: | drmini in aust [ Sun Mar 27, 2005 6:49 pm ] |
| Post subject: | |
|
|
|
| Author: | IwannaMini [ Sun Mar 27, 2005 8:01 pm ] |
| Post subject: | |
Thought I would semi-hikack this thread because the people in the know are all here. Mo has been running super rich, so I gave his carbie a screw upwards to lean him up, now he is running way too lean and is going like SH#THOUSE. I have read about 100 pages of carbie stuff this afternoon and cant get an idiots proof guide to knowing when its too rich, too lean or just right....
Any advice... Also did someone mention not too recently a place at Burwood with a good reputation for carburettor servicing..?? You know just in case
|
|
| Page 1 of 2 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|