Early Binis have a big tacho. 6 inches I believe.
| ausmini https://www.ausmini.com/forums/ |
|
| Gauge Clusters https://www.ausmini.com/forums/viewtopic.php?f=2&t=58227 |
Page 1 of 2 |
| Author: | blake12345 [ Sun Oct 25, 2009 9:04 pm ] |
| Post subject: | Gauge Clusters |
Hey, I was wondering if there were any gauge clusters from other cars that could be adapted to the mini? The ones i have seen dont seem to have a screw bit for the speedo cable. I know i could get a clubman 3 gauge cluster but i was wanting something a little different. Thanks Blake |
|
| Author: | mini maxx [ Sun Oct 25, 2009 9:08 pm ] |
| Post subject: | |
I know early Camira SLE clusters are a close fit but i think you have to modify the speedo cable at the speedo end a lil bit |
|
| Author: | blake12345 [ Sun Oct 25, 2009 9:17 pm ] |
| Post subject: | |
Oh ok im going to go find what one looks like. Im wanting to go for something that has a big central Tacho |
|
| Author: | Harley [ Sun Oct 25, 2009 9:53 pm ] |
| Post subject: | |
Early Binis have a big tacho. 6 inches I believe.
|
|
| Author: | blake12345 [ Sun Oct 25, 2009 9:55 pm ] |
| Post subject: | |
Yeh its big but i want bigger!!!! nah i was looking at the S15 gauges |
|
| Author: | Morris 1100 [ Mon Oct 26, 2009 7:08 pm ] |
| Post subject: | |
Why would you want a big tacho? Is there someting wrong with your eyesight? (and hearing) 
|
|
| Author: | mini maxx [ Mon Oct 26, 2009 8:04 pm ] |
| Post subject: | |
The old red or grey Massey ferguson Tractors have a pretty big tacho 
|
|
| Author: | Harley [ Mon Oct 26, 2009 8:23 pm ] |
| Post subject: | |
Were they bigger than the one in my car?
|
|
| Author: | blake12345 [ Mon Oct 26, 2009 8:25 pm ] |
| Post subject: | |
Right I may need to clear this up. I'm wanting something Where the tacho is the biggest dial on the cluster as I drive off the rpm not the speed but yeh i'll find a picture of thE kind of thing. |
|
| Author: | Morris 1100 [ Mon Oct 26, 2009 8:39 pm ] |
| Post subject: | |
If you drive off the RPM your licence will not last very long. 
|
|
| Author: | ALPINE MOKE [ Mon Oct 26, 2009 8:44 pm ] |
| Post subject: | big taco things |
Have a look at morris marinas |
|
| Author: | sgc [ Tue Oct 27, 2009 11:18 am ] |
| Post subject: | |
Morris 1100 wrote: If you drive off the RPM your licence will not last very long.
I've been doing this for 15 years, haven't lost it yet 
I reckon if I judged my speed by the speedo, I would have lost my licence long ago
|
|
| Author: | Asphalt [ Tue Oct 27, 2009 7:59 pm ] |
| Post subject: | |
I've put a set of Triumph 2000 or 2500 gauges in the std. centre speedo cluster  http://www.ausmini.com/forums/viewtopic.php?t=57141
|
|
| Author: | blue_deluxe [ Tue Oct 27, 2009 8:14 pm ] |
| Post subject: | |
I find it really hard to lose my licence, its always in my wallet. And i just go about 65ish everywhere, nice and smooth with the cam in it then. |
|
| Author: | estapol [ Wed Oct 28, 2009 6:05 pm ] |
| Post subject: | |
Ok im just running off the top of my head as an avionics tech, but you could most probably use any gauges in a mini its just a matter of remanufacturing the looms that come from various components to the back of the gauge..... wouldnt be too hard just a bit of persistence and crimping and you can have any gauge cluster you like. Please someone tell me if I'm wrong Cheers Hoba |
|
| Page 1 of 2 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|