| ausmini https://www.ausmini.com/forums/ |
|
| Radiator Cap Length https://www.ausmini.com/forums/viewtopic.php?f=2&t=58249 |
Page 1 of 1 |
| Author: | ryan [ Mon Oct 26, 2009 6:56 pm ] |
| Post subject: | Radiator Cap Length |
Hi all, How do I tell if I need a short neck cap or a long neck cap? I'm almost certain that I need a short neck, but I just want to check. |
|
| Author: | drmini in aust [ Mon Oct 26, 2009 7:02 pm ] |
| Post subject: | |
Try a std Oz Mini cap in it. They are the long cap. If difficult to tighten, it's the wrong one. It's the UK rads that need a short one, but sometimes necks get replaced. |
|
| Author: | ryan [ Mon Oct 26, 2009 7:27 pm ] |
| Post subject: | |
I thought about doing that, but I don't have an original cap to test with. Is there a measurement? |
|
| Author: | GT mowog [ Sun Nov 08, 2009 11:02 am ] |
| Post subject: | |
Knew I had it somewhere - sorry for the tardy response! Short ones are 27.5 mm tall Long ones are 33.6 mm tall These are the Overall Heights. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|