After pulling out a pretty rusted one this morning, I'm now looking about for a high perfromance replacement. They seem to be pretty scarce.

Here's one I found.

http://www2.obp.uk.net/catalog/product_info.php?manufacturers_id=16&products_id=489&osCsid=3f536477106050a99df083ffc1cb2a79

Anybody know of others?

By the way...Haynes Manuals lie. "Push out the clevis pin to remove the clutch master cylinder". Half an hour later with a big hammer and pin punch the thing starts to move!!! Rusted...

_________________
Regards,

Mike
"He who dies with the most toys wins."

Speak to John Smidt at Mini King, he has a heap of them. I got a late Moke one there last year.

Send him a pic of the one you have, there are a few types.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R.

Ive had a look into these, seem to fit pretty well under the dash board and look very tidy too. I wouldnt go for that kit though, have a chat to an engineer and see if hes happy with normal rubber hose to the resevoirs, i think braided hose for an unpressurised part of the system is overkill.

If you get one ill be very interested in how it looks, just got to get spare cash before ill get mine.

_________________
Simplify and add lightness