The carby size is measured by the bore in the flange that bolts onto the manifold.
| ausmini https://www.ausmini.com/forums/ |
|
| SU size ? https://www.ausmini.com/forums/viewtopic.php?f=2&t=5840 |
Page 1 of 1 |
| Author: | sean [ Sun Mar 27, 2005 12:55 am ] |
| Post subject: | SU size ? |
How do I know what type of SU I have. I have seen all the different sizes being mentioned so what bit do I measure to assertain it's size. Going to fit cooper s extractors on soon (steel pressed ones). |
|
| Author: | drmini in aust [ Sun Mar 27, 2005 6:00 am ] |
| Post subject: | |
The carby size is measured by the bore in the flange that bolts onto the manifold.
|
|
| Author: | IwannaMini [ Sun Mar 27, 2005 9:49 am ] |
| Post subject: | |
drmini in aust wrote: The carby size is measured by the bore in the flange that bolts onto the manifold.
 LOL at DrMini... now thats a simple enough answer...
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|