| ausmini https://www.ausmini.com/forums/ |
|
| Chong's 1100s https://www.ausmini.com/forums/viewtopic.php?f=2&t=5871 |
Page 1 of 3 |
| Author: | gafmo [ Mon Mar 28, 2005 4:00 pm ] |
| Post subject: | Chong's 1100s |
Look good from here 
There's a Hole in the Bucket 
Is that a Cooper S Rod I See 
Can't Be good 
Bent Dizzy Drive 
Cranked 
Spare parts 
Please refer to For Sale Section for one Use Once Coopers S Piston and Rod and Mini Twin Cam's Refer to 68Delux (Chong) for all Enquiries Please also Email/Pm for additional Pictures = Chong That was a Fun Morning  
|
|
| Author: | Lillee [ Mon Mar 28, 2005 4:25 pm ] |
| Post subject: | |
Thanks Gafmo! Everyone, my agent for this sale is Gafmo!
|
|
| Author: | danidad [ Mon Mar 28, 2005 4:28 pm ] |
| Post subject: | |
Fark thats a nasty let go..nothing that cant be fixed with a hammer and a file though LOL... |
|
| Author: | drmini in aust [ Mon Mar 28, 2005 4:30 pm ] |
| Post subject: | |
Moral of this story... if you don't know the history of the rod bolts, buy new ones! Very nasty..! Camshaft was busted clean in half too.... hard to see in pics. But the star drive oil pump survived. |
|
| Author: | gafmo [ Mon Mar 28, 2005 4:32 pm ] |
| Post subject: | |
drmini in aust wrote: Camshaft was busted clean in half too.... hard to see in pics.
Checkout For Sale Section
|
|
| Author: | Lillee [ Mon Mar 28, 2005 4:40 pm ] |
| Post subject: | |
Classic! Got some good S rods out of the other 3 though eh? they sure "looked" good. Taking the block off the gearbox was like openning a pandora's box! 5 guys waiting to see what the heck poked a hole that big! You can see daylight through it lol For Sale!!! $400 as is!!!
|
|
| Author: | drmini in aust [ Mon Mar 28, 2005 4:41 pm ] |
| Post subject: | |
68Delux wrote: Classic!
For Sale!!! $400 as is!!! Only good parts on it are the head studs and bearing caps...
|
|
| Author: | Lillee [ Mon Mar 28, 2005 4:42 pm ] |
| Post subject: | |
danidad wrote: Fark thats a nasty let go..nothing that cant be fixed with a hammer and a file though LOL...
It's completely buggered in 3 places. There are actaully 3 cracks, one opposite this one and another crack on the gearbox, just underneath where the rod has "vibrated" after it let go!
|
|
| Author: | gafmo [ Mon Mar 28, 2005 4:43 pm ] |
| Post subject: | |
68Delux wrote: Classic!
5 guys waiting to see what the heck poked a hole that big! You can see daylight through it lol Then we had a Beer
|
|
| Author: | 1310/71 [ Mon Mar 28, 2005 4:56 pm ] |
| Post subject: | |
Chong, Hope the OTHER block was worth going to melbourne for! Shame the crank wasn't salvagable out of that block. KB |
|
| Author: | drmini in aust [ Mon Mar 28, 2005 5:00 pm ] |
| Post subject: | |
1310/71 wrote: Chong,
Hope the OTHER block was worth going to melbourne for! Shame the crank wasn't salvagable out of that block. KB It might be, given enough $$$. It's .010/.010 sizes. Repco used to weld them up (30 years ago) with an automatic process then grind them back. I used to get VW ones done. Probably easier to go find another. But hey, it's not cracked!!
ps. it's only a small journal one, so can't just grind it down. |
|
| Author: | 1310/71 [ Mon Mar 28, 2005 5:09 pm ] |
| Post subject: | |
drmini in aust wrote: 1310/71 wrote: Chong, Hope the OTHER block was worth going to melbourne for! Shame the crank wasn't salvagable out of that block. KB It might be, given enough $$$. It's .010/.010 sizes. Repco used to weld them up (30 years ago) with an automatic process then grind them back. I used to get VW ones done. Probably easier to go find another. But hey, it's not cracked!! ps. it's only a small journal one, so can't just grind it down. Dave told me there is a repco workshop up in Gosford, we passed it on the way to kazjim's that day. On an unrelated matter - I'm hoping to go to Karcraft for bits tomorrow. Did you say they weren't there on tues and thursdays last week? |
|
| Author: | 9YaTaH [ Mon Mar 28, 2005 5:54 pm ] |
| Post subject: | Classic alright |
68Delux wrote: Classic!
Got some good S rods out of the other 3 though eh? they sure "looked" good. Taking the block off the gearbox was like openning a pandora's box! 5 guys waiting to see what the heck poked a hole that big! You can see daylight through it lol For Sale!!! $400 as is!!! Classic electrical fault....dissy drive left the distributor to work things out for itself 
|
|
| Author: | gafmo [ Mon Mar 28, 2005 6:43 pm ] |
| Post subject: | |
Electrical fault with a differnace
|
|
| Author: | drmini in aust [ Mon Mar 28, 2005 6:49 pm ] |
| Post subject: | |
1310/71 wrote- "On an unrelated matter - I'm hoping to go to Karcraft for bits tomorrow. Did you say they weren't there on tues and thursdays last week?" ???
No, I just said they would be shut for Easter break. I won't be able to get there until Friday, probably. |
|
| Page 1 of 3 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|