casting all opinions & facts aside re running 13x7's, what do all prefer
the softline or the classic? (on a round nose, with sports pack arches, guards have been cut for 13's)
Softline
Classic
| ausmini https://www.ausmini.com/forums/ |
|
| 13x7's opinions please https://www.ausmini.com/forums/viewtopic.php?f=2&t=58894 |
Page 1 of 1 |
| Author: | junior [ Thu Nov 19, 2009 3:57 pm ] |
| Post subject: | 13x7's opinions please |
casting all opinions & facts aside re running 13x7's, what do all prefer the softline or the classic? (on a round nose, with sports pack arches, guards have been cut for 13's) Softline
Classic
|
|
| Author: | jbeenz [ Thu Nov 19, 2009 4:35 pm ] |
| Post subject: | |
softline, but with rounded arches such as sportpacs. |
|
| Author: | blue_deluxe [ Thu Nov 19, 2009 5:17 pm ] |
| Post subject: | |
Got to be classic, and go for miglia arches. But theyd look better on a clubman. I dont think you can beat 10s on a roundnose. |
|
| Author: | lil-ute [ Thu Nov 19, 2009 8:19 pm ] |
| Post subject: | |
i have classic and they are pretty sexy |
|
| Author: | Pin4e [ Thu Nov 19, 2009 9:20 pm ] |
| Post subject: | |
classic 
|
|
| Author: | VicMini13 [ Fri Nov 20, 2009 7:00 am ] |
| Post subject: | |
I personally think that every Minis is supposed to be unique - so I'd go for the softline because they're different to the majority 
I also think that they will suit the whole "rounded" feel of a roundnose with the soft curves of the Sportspacks. The genuine Sportspack rims were all soft curved to. 
|
|
| Author: | MiniMan_Alis [ Fri Nov 20, 2009 7:40 am ] |
| Post subject: | |
go the softline they look siiick
|
|
| Author: | MINTI [ Fri Nov 27, 2009 3:40 pm ] |
| Post subject: | |
i need to stop opening this thread while wearing jeans >8o or those softlines should have a censored sticker... ANYWAY .. are these available as a semi-deep dish? .. and being 7's would that create more fitting problems? |
|
| Author: | awdmoke [ Fri Nov 27, 2009 3:44 pm ] |
| Post subject: | |
Deeper the dish, the bigger the flares needed. |
|
| Author: | junior [ Fri Nov 27, 2009 3:47 pm ] |
| Post subject: | |
MINTI wrote: ANYWAY .. are these available as a semi-deep dish? .. and being 7's would that create more fitting problems?
they are available in a 6", which doesn't have the extended 'dish' but look deeper than the standard 6" due to the softline edge fitment is not a problem as the guards have already been cut for previous 13x7's |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|