What sort or calipers have you got? And just to check, have you put them on so the bleed nipple faces up (some have put the LH on the RH etc
). Just bleeding from the nipple should be all that you need do.
| ausmini https://www.ausmini.com/forums/ |
|
| disc brake bleeding https://www.ausmini.com/forums/viewtopic.php?f=2&t=59327 |
Page 1 of 1 |
| Author: | estapol [ Sat Dec 05, 2009 1:20 pm ] |
| Post subject: | disc brake bleeding |
hey guys just chucked my new discs on the front just wondering with the bleed screws on the caliper theres a nipple and that undoes out of a bigger union which connects to the caliper when bleeding should i undo just the nipple or the bigger screw as well? |
|
| Author: | GT mowog [ Sat Dec 05, 2009 3:21 pm ] |
| Post subject: | |
What sort or calipers have you got? And just to check, have you put them on so the bleed nipple faces up (some have put the LH on the RH etc ). Just bleeding from the nipple should be all that you need do.
|
|
| Author: | estapol [ Sat Dec 05, 2009 5:31 pm ] |
| Post subject: | |
i bought full disc assemblies from minisport so theres only one way the can go on  and theyre minisport calipers. its braking alright just a bit spongy want to get them perfect. didnt spend 1300 on nothing
|
|
| Author: | GT mowog [ Sat Dec 05, 2009 5:52 pm ] |
| Post subject: | |
The pedal may be a bit spongy until the pad bed in. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|