mine doesnt have a vac pipe on distributor...but i hear what your saying, thanks doc
| ausmini https://www.ausmini.com/forums/ |
|
| timing for vivs new motor https://www.ausmini.com/forums/viewtopic.php?f=2&t=5951 |
Page 1 of 1 |
| Author: | czerial [ Wed Mar 30, 2005 10:58 pm ] |
| Post subject: | timing for vivs new motor |
so to all that dont know the specs 998cc (60 thou over 1060cc) 1.5 carb 997 cooper cam everything else standard... so what should the timing be? standard? or modified to cope with the new cam??? |
|
| Author: | drmini in aust [ Wed Mar 30, 2005 11:03 pm ] |
| Post subject: | |
I'd start at 7*BTDC (check with vac pipe off), then advance it until it runs best. Depends on many things- cam, C/R, head shape, mech advance curve in dizzy, etc etc. Timing correctly for power is more important than getting it to spec at idle. |
|
| Author: | czerial [ Wed Mar 30, 2005 11:09 pm ] |
| Post subject: | |
mine doesnt have a vac pipe on distributor...but i hear what your saying, thanks doc
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|